• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1953–1957

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 25 R Full specifications

FIAT 605.010 four-cylinder. The manufacturer claimed 23.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

23.7 hp

17.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”, claimed

Weight
3,516 lb
Top speed
9.3 mph

Fiat 25 R specs: key facts

  • The Fiat 25 R was built from 1953 to 1957.

  • The Fiat 25 R has a claimed engine power (gross or net not stated) of 17.7 kW (23.7 hp); it has no measured PTO figure.

  • The Fiat 25 R was offered in two-wheel-drive and four-wheel-drive versions.

  • The Fiat 25 R has a FIAT 605.010 engine, a 4-cylinder 1.90 L unit.

  • The Fiat 25 R weighs 1,595 kg (3,516 lb) unladen.

  • The Fiat 25 R has a dependent rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

Fiat 25 R tractor
Photo: Александр Сигачёв, CC0 via Wikimedia Commons · Wrong photo?

How much horsepower does a 25 R have?

The only figure for the 25 R is 23.7 hp (17.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
23.7 hp

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

What engine is in a 25 R?

A 25 R has an FIAT 605.010, a 4-cylinder 1.90 L engine.

Engine — 25 R engine specifications
Make & modelFIAT 605.010
Cylinders4, liquid-cooled
Displacement116.0 ci · 1.90 L
Max torque69 lb·ft · 94 N·m @ 1,200 rpm
Electrical system24 V

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

How much will a 25 R lift?

Hydraulic and PTO specifications for the 25 R are below.

Hydraulics & PTO — 25 R hydraulics and PTO specifications
Rear PTODependent, transmission-driven, 540 rpmGround-speed PTO available
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

What transmission does a 25 R have?

Transmission specifications for the 25 R are below.

Transmission — 25 R transmission specifications
SteeringMechanical gear steering
Top speed9.3 mph · 15 km/h

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

How much does a 25 R weigh?

A 25 R weighs 3,516 lb (1,595 kg) unladen.

Weights & dimensions — 25 R weights and dimensions
Unladen weight3,516 lb · 1,595 kg
Wheelbase61.4 in · 1,560 mm
Length99.0 in · 2,515 mm
Width59.6 in · 1,515 mm
Height51.7 in · 1,313 mm
Ground clearance15.4 in · 390 mm
Front track50.8–64.6 in · 1,290–1,642 mm
Rear track48.8–67.3 in · 1,240–1,710 mm
Turning radius, braked8.2 ft · 2.50 m

Source · Traktorenlexikon, “Fiat 25 R (1953-1957)”

Which tractors compare with a 25 R?

Within 10% of its 20 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 25 R two-wheel drive or four-wheel drive?

The Fiat 25 R was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 25 R have?

A 25 R has a dependent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 25 R (1953-1957)”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 25 R (1953-1957)CC BY-SA 4.0, WIKIBOOKS-TL-108319 · revision 1071421. Wikibooks contributors (Traktorenlexikon). Original document