10 material differences · fewer than 12
Tractor oneFiat 25 R1953–1957No measured PTO figureTractor twoKramer 350 Export1963–1968No measured PTO figure
Which should you choose?
Read our verdict on the 25 R and the 350 Export → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 25 R | 350 Export | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 23.7 hp | 31.9 hp | +34% 350 Export |
| Engine declared | FIAT 605.010 | Standard Motor Company (Coventry/England) OE 138 | differs |
| Displacement declared | 1.90 L | 2.26 L | +19% 350 Export |
| Maximum torque declared | 69 lb·ft · 94 N·m | 88 lb·ft · 120 N·m | +28% 350 Export |
| Transmission | |||
| Top speed declared | 9.3 mph · 15 km/h | 13.7 mph · 22 km/h | +47% 350 Export |
| Clutch declared | — | Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.3 gpm · 20.0 L/min | — |
| Pressure declared | — | 1,707 psi · 118 bar | — |
| Rear PTO speeds declared | 540 rpm | 585 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 3,516 lb · 1,595 kg | 3,924 lb · 1,780 kg | +12% 350 Export |
| Maximum permissible mass declared | — | 5,512 lb · 2,500 kg | — |
| Wheelbase declared | 61.4 in · 1,560 mm | 77.2 in · 1,960 mm | +26% 350 Export |
| Length declared | 99.0 in · 2,515 mm | 124.8 in · 3,170 mm | +26% 350 Export |
| Width declared | 59.6–78.1 in · 1,515–1,985 mm | 62.6 in · 1,590 mm | differs |
| Ground clearance declared | 15.4 in · 390 mm | 15.7 in · 400 mm | — |
| Turning radius, braked declared | 8.2 ft · 2.50 m | — | — |
| Fuel tank declared | 39.1 qt · 37 L | 37.0 qt · 35 L | +6% 25 R |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fiat 25 R sources
- Source: Traktorenlexikon, “Fiat 25 R (1953-1957)”
Kramer 350 Export sources
- Source: Traktorenlexikon, “Kramer 350 Export”