- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- from 1988
- 831 built
WhichTractor size, not the maker’s category
Fendt Farmer 260S Hydraulics & PTO specs
11 hydraulics and PTO values on record for the Farmer 260 S.
Engine power, claimed · gross or net not stated
59 hp
44 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 260 S/SA”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a Farmer 260 S have?
Hydraulic and hitch specifications for the Farmer 260 S are below.
| Pump flow | 11.0 gpm · 41.5 L/min |
|---|---|
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fendt Farmer 260 S/SA”
What PTO does a Farmer 260 S have?
A Farmer 260 S has a 540/750 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/750 rpm |
| Engine speed at 540 PTO | 2,286 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 53.6 hp · 39.9 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Fendt Farmer 260 S/SA”
Sources and how this page was built
11 hydraulics and PTO values from Traktorenlexikon, “Fendt Farmer 260 S/SA”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt Farmer 260 S/SA — CC BY-SA 4.0, WIKIBOOKS-TL-66565 · revision 890775. Wikibooks contributors (Traktorenlexikon). Original document