Fendt 924 Vario Hydraulics & PTO specs

A 924 Vario has a 540/1000 rpm rear PTO.

On OECD Test 2545, the 924 Vario delivered 224.1 hp (167.1 kW) at the PTO shaft, at maximum power.

14 hydraulics and PTO values on record for the 924 Vario.

Engine power, claimed · gross or net not stated

207 hp

154 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fendt 924 Vario”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

What hydraulics does a 924 Vario have?

Hydraulic and hitch specifications for the 924 Vario are below.

Hydraulics & hitch — 924 Vario Hydraulics & hitch
Hydraulic control	Load sensing
Front hitch available, optional	Yes

Source · Traktorenlexikon, “Fendt 924 Vario”

A 924 Vario has a 540/1000 rpm rear PTO.

PTO — 924 Vario PTO
Rear PTO speeds	540/1000 rpmOn record for 1 of 2 configurations
Rear PTO shaft	44.45 mm, 6 splinesOn record for 1 of 2 configurations
Front PTO available, optional	Yes^{Source 2}

Source · OECD test report 2545, 2010

On OECD Test 2545, the 924 Vario delivered 224.1 hp (167.1 kW) at the PTO shaft, at maximum power.

OECD Test 2545 — 924 Vario as tested, configuration as printed: “4 WD · T 922 - continuously variable transmission - 60 km/h”
PTO power, at maximum power	224.1 hp · 167.1 kWAt 887 PTO rpmAt 1,800 engine rpm
PTO power, at rated engine speed	194.6 hp · 145.1 kWAt 1,084 PTO rpmAt 2,200 engine rpm
PTO power, at standard PTO speed	213.0 hp · 158.8 kWAt 1,000 PTO rpmAt 2,030 engine rpm
PTO shaft speed, at maximum power	887 rpm
PTO shaft speed, at rated engine speed	1,084 rpm
PTO shaft speed, at standard PTO speed	1,000 rpm
Hydraulic power, at maximum power	40.8 hp · 30.4 kW
Hydraulic pump delivery, at maximum power	27.3 gpm · 103.2 L/min
Three-point lift force	18,794 lbf · 83.6 kN

Source · OECD test report 2545, 2010

14 hydraulics and PTO values from Traktorenlexikon, “Fendt 924 Vario”; and OECD test report 2545, 2010.

Sources checked

14 SEP 2026

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 2/2 545: Fendt 924 Vario TMS, COM IIIa — Licence not stated by the publisher; facts cited, OECD-2545 · published 2010-03-04 · retrieved 2026-09-14. OECD; testing station DLG e.V., Gross-Umstadt, Germany. Original document
Traktorenlexikon: Fendt 924 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-72911 · revision 990837. Wikibooks contributors (Traktorenlexikon). Original document