- Vehicle type: unspecified
- Orchard & vineyard, Rigid chassis
- WhichTractor size: Compact
- No lab test on file
- from 2009
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Fendt Vario 208 V/F specs: hp, weight, years
The manufacturer claimed 70 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
70 hp
52 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt 208 V/F”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,129–6,305 lb
- Hyd. flow
- 20.1 gpm
- Top speed
- 18.6–24.9 mph
Fendt Vario 208 V/F specs: key facts
The Fendt Vario 208 V/F was first built in 2009.
The Fendt Vario 208 V/F has a claimed engine power (gross or net not stated) of 52 kW (70 hp); it has no measured PTO figure.
The Fendt Vario 208 V/F was offered in two-wheel-drive and four-wheel-drive versions.
The Fendt Vario 208 V/F weighs 2,780–2,860 kg (6,129–6,305 lb) unladen.
The Fendt Vario 208 V/F has a rear PTO running at 540/540E/1000 rpm.
The hydraulic pump of the Fendt Vario 208 V/F delivers 76.0 L/min (20.1 gpm).
Source · Traktorenlexikon, “Fendt 208 V/F”
How does the Vario 208 V/F compare with its class?
- Strength:
A hydraulic pump flow of 76 L/min is high for its class — 90% above the median of 40 L/min across the 323 machines within 10% of its power that hold this figure.
- Strength:
A maximum engine torque of 337 N·m is high for its class — 35% above the median of 249 N·m across the 321 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 394 comparable records. How we work this out
How much horsepower does a Vario 208 V/F have?
The only figure for the Vario 208 V/F is 70 hp (52 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fendt 208 V/F”
How much will a Vario 208 V/F lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Vario 208 V/F are below.
| Pump flow | 20.1 gpm · 76.0 L/min |
|---|---|
| Pressure | 2,901 psi · 200 bar |
| Rear PTO | 540/540E/1000 rpm |
Source · Traktorenlexikon, “Fendt 208 V/F”
What transmission does a Vario 208 V/F have?
Transmission specifications for the Vario 208 V/F are below.
| Steering | Hydrostatic steering |
|---|---|
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Fendt 208 V/F”
How much does a Vario 208 V/F weigh?
A Vario 208 V/F weighs 6,129–6,305 lb (2,780–2,860 kg) unladen.
| Unladen weight | 6,129–6,305 lb · 2,780–2,860 kgthe article lists alternatives |
|---|---|
| Wheelbase | 85.0 in · 2,160 mm |
| Length | 140.9–145.0 in · 3,578–3,683 mmthe article lists alternatives |
| Width | 45.3–50.0 in · 1,151–1,269 mm |
| Height | 94.1–96.9 in · 2,390–2,462 mmthe article lists alternatives |
| Front track | 37.0 in · 940 mm |
| Rear track | 30.6–39.4 in · 777–1,000 mmthe article lists alternatives |
Source · Traktorenlexikon, “Fendt 208 V/F”
Common questions about the Fendt Vario 208 V/F
Is a Vario 208 V/F two-wheel drive or four-wheel drive?
The Fendt Vario 208 V/F was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a Vario 208 V/F have?
A Vario 208 V/F has a 540/540E/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Fendt 208 V/F”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt 208 V/F — CC BY-SA 4.0, WIKIBOOKS-TL-99761 · revision 1060365. Wikibooks contributors (Traktorenlexikon). Original document