- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- from 2015
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fendt Vario 1042 Full specifications
MAN D 2676 LE 13 six-cylinder diesel. The manufacturer claimed 429 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
429 hp
320 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt 1042 Vario”, claimed
- Weight
- 30,865 lb
- 3-point lift
- 29,045 lb
- Top speed
- 37.3 mph
Fendt Vario 1042 specs: key facts
The Fendt Vario 1042 was first built in 2015.
The Fendt Vario 1042 has a claimed engine power (gross or net not stated) of 320 kW (429 hp); it has no measured PTO figure.
The Fendt Vario 1042 is four-wheel drive (4WD).
The Fendt Vario 1042 has a MAN D 2676 LE 13 engine, a 6-cylinder 12.42 L diesel unit.Source 1
The Fendt Vario 1042 weighs 14,000 kg (30,865 lb) unladen.
The three-point hitch of the Fendt Vario 1042 lifts 13,175 kg (29,045 lb) at the lower-link ends.
Source · Traktorenlexikon, “Fendt 1042 Vario”
How much horsepower does a Vario 1042 have?
The only figure for the Vario 1042 is 429 hp (320 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fendt 1042 Vario”
What engine is in a Vario 1042?
A Vario 1042 has an MAN D 2676 LE 13, a 6-cylinder 12.42 L diesel engine.
| Make & model | MAN D 2676 LE 13 |
|---|---|
| Cylinders | 6, liquid-cooledSource 2 |
| Displacement | 757.9 ci · 12.42 L |
| Max torque | 1,549 lb·ft · 2,100 N·m @ 1,000 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Fendt 1038 Vario”
How much will a Vario 1042 lift?
A Vario 1042 lifts 29,045 lb (13,175 kg) at the lower-link ends.
| System | Load sensing |
|---|---|
| Lift at ends | 29,045 lb · 13,175 kg |
Source · Traktorenlexikon, “Fendt 1042 Vario”
What transmission does a Vario 1042 have?
Transmission specifications for the Vario 1042 are below.
| Top speed | 37.3 mph · 60 km/h |
|---|
Source · Traktorenlexikon, “Fendt 1042 Vario”
How much does a Vario 1042 weigh?
A Vario 1042 weighs 30,865 lb (14,000 kg) unladen.
| Unladen weight | 30,865 lb · 14,000 kg |
|---|---|
| Maximum permissible mass | 39,683 lb · 18,000 kg |
| Wheelbase | 129.9 in · 3,300 mm |
| Length | 242.4 in · 6,157 mm |
| Width | 108.3 in · 2,750 mm |
| Height | 140.6 in · 3,570 mm |
| Ground clearance | 23.6 in · 600 mm |
| Front track | 82.7 in · 2,100 mm |
| Rear track | 78.7 in · 2,000 mm |
Source · Traktorenlexikon, “Fendt 1042 Vario”
Everything else people ask
Is a Vario 1042 two-wheel drive or four-wheel drive?
The Fendt Vario 1042 is four-wheel drive (4WD).
Where this page comes from
Compiled from Traktorenlexikon, “Fendt 1038 Vario”; and Traktorenlexikon, “Fendt 1042 Vario”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt 1038 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-99822 · revision 990841. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fendt 1042 Vario — CC BY-SA 4.0, WIKIBOOKS-TL-99832 · revision 990842. Wikibooks contributors (Traktorenlexikon). Original document