- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1952–1953
- 23 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Fahr D 12H specs: hp, weight, years
Güldner 1 DA one-cylinder diesel. The manufacturer claimed 11.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
11.8 hp
8.8 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fahr D 12 H”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 2,535 lb
- Top speed
- 12.3 mph
Fahr D 12H specs: key facts
The Fahr D 12H was built from 1952 to 1953.
The Fahr D 12H has a claimed engine power (gross or net not stated) of 8.8 kW (11.8 hp); it has no measured PTO figure.
The Fahr D 12H is two-wheel drive (2WD).
The Fahr D 12H has a Güldner 1 DA engine, a 1-cylinder 0.82 L diesel unit.Source 1
The Fahr D 12H weighs 1,150 kg (2,535 lb) unladen.
The Fahr D 12H has an independent rear PTO running at 600 rpm.
Source · Traktorenlexikon, “Fahr D 12 H”
How does the D 12H compare with its class?
We will not rate this machine against its class. Only 23 published tractors sit within 10% of its 8.8 kW — too few to say what is normal.
Derived by WhichTractor. How we work this out
How much horsepower does a D 12H have?
The only figure for the D 12H is 11.8 hp (8.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fahr D 12 H”
What engine is in a D 12H?
A D 12H has a Güldner 1 DA, a 1-cylinder 0.82 L diesel engine.
| Make & model | Güldner 1 DA |
|---|---|
| Cylinders | 1, liquid-cooledSource 2 |
| Displacement | 49.7 ci · 0.82 L |
| Max torque | 33 lb·ft · 45 N·m @ 1,600 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Fahr D 12”
How much will a D 12H lift?
Hydraulic and PTO specifications for the D 12H are below.
| Pressure | 3,129 psi · 216 bar |
|---|---|
| Rear PTO | Independent, transmission-driven, 600 rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm |
Source · Traktorenlexikon, “Fahr D 12 H”
What transmission does a D 12H have?
Transmission specifications for the D 12H are below.
| Clutch | Pedal operated dry Fichtel & Sachs single disc clutch |
|---|---|
| Steering | ZF individual wheel steering |
| Top speed | 12.3 mph · 19.8 km/h |
Source · Traktorenlexikon, “Fahr D 12 H”
How much does a D 12H weigh?
A D 12H weighs 2,535 lb (1,150 kg) unladen.
| Unladen weight | 2,535 lb · 1,150 kg |
|---|---|
| Maximum permissible mass | 3,638 lb · 1,650 kg |
| Maximum front axle load | 1,543 lb · 700 kg |
| Maximum rear axle load | 2,094 lb · 950 kg |
| Wheelbase | 60.6 in · 1,540 mm |
| Length | 97.2 in · 2,470 mm |
| Width | 61.5 in · 1,562 mm |
| Height | 56.8 in · 1,443 mm |
| Ground clearance | 16.1 in · 410 mm |
| Front track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles |
| Rear track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles |
| Turning radius, braked | 6.9 ft · 2.10 m |
Source · Traktorenlexikon, “Fahr D 12 H”
What oil does a D 12H take, and how much?
A D 12H engine takes 4.5 qt (4.3 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 4.5 qt · 4.3 LSource: Traktorenlexikon, “Fahr D 12 H” · single source, not independently verified |
| Transmission | 0.4 qt · 0 LSource: Traktorenlexikon, “Fahr D 12 H” · single source, not independently verified |
| Hydraulic | 9.5 qt · 9 LSource: Traktorenlexikon, “Fahr D 12 H” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a D 12H?
Within 10% of its 12 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- Fahr D 12 NH12 hp PTO, claimed · 1953–1954Side by side with the D 12H →
- Fahr D 12N12 hp PTO, claimed · 1953–1954Side by side with the D 12H →
- Fahr D 9012 hp PTO, claimed · 1953–1956Side by side with the D 12H →
- Fahr D 90H12 hp PTO, claimed · 1953–1956Side by side with the D 12H →
- Deutz F1L 712/112.18 hp PTO, claimed · 1958–1959Side by side with the D 12H →
- International Harvester DLD 212.5 hp PTO, claimed · 1953–1956Side by side with the D 12H →
Common questions about the Fahr D 12H
Is a D 12H two-wheel drive or four-wheel drive?
The Fahr D 12H is two-wheel drive (2WD).
What PTO does a D 12H have?
A D 12H has a independent 600 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Fahr D 12 H”; and Traktorenlexikon, “Fahr D 12”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fahr D 12 — CC BY-SA 4.0, WIKIBOOKS-TL-49054 · revision 990472. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fahr D 12 H — CC BY-SA 4.0, WIKIBOOKS-TL-103623 · revision 990473. Wikibooks contributors (Traktorenlexikon). Original document