- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1985–1990
WhichTractor size, not the maker’s category
Deutz-Fahr DX 3.80 AS Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the DX 3.80 AS.
Engine power, claimed · gross or net not stated
74 hp
55 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 3.80 AS”, claimed
How much will a DX 3.80 AS lift?
A DX 3.80 AS lifts 5,291 lb (2,400 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 10.6 gpm · 40.0 L/min |
| Steering pump flow | 7.1 gpm · 27.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves, optional | 3 |
| Lift capacity at ball ends | 5,291 lb · 2,400 kg |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.80 AS”
What PTO does a DX 3.80 AS have?
A DX 3.80 AS has a 540/1000 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,025 rpm |
| Rear PTO shaft | 1 3/8"-6 splines (Form 1) |
| PTO power, claimed | 66.2 hp · 49.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.80 AS”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 3.80 AS”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.80 AS — CC BY-SA 4.0, WIKIBOOKS-TL-102987 · revision 1023419. Wikibooks contributors (Traktorenlexikon). Original document