- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1996
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz-Fahr DX 3.75A Hydraulics & PTO specs
12 hydraulics and PTO values on record for the DX 3.75 A.
Engine power, claimed · gross or net not stated
76.6 hp
57.1 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 3.75 A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a DX 3.75 A lift?
A DX 3.75 A lifts 7,275 lb (3,300 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 10.6 gpm · 40.0 L/min |
| Steering pump flow | 7.1 gpm · 27.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 7,275 lb · 3,300 kg |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.75 A”
What PTO does a DX 3.75 A have?
A DX 3.75 A has a 540/1000 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,202 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.75 A”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 3.75 A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.75 A — CC BY-SA 4.0, WIKIBOOKS-TL-102983 · revision 823389. Wikibooks contributors (Traktorenlexikon). Original document