- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1987–1996
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Deutz-Fahr DX 3.65 Dimensions & weights
15 dimension and weight values on record for the DX 3.65.
Engine power, claimed · gross or net not stated
69.1 hp
51.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 3.65”, claimed
How big is a DX 3.65?
A DX 3.65 is 150.4 in (3,820 mm) long, 85.9 in (2,183 mm) wide and 101.6 in (2,580 mm) tall.
| Wheelbase | 88.6 in · 2,250 mm |
|---|---|
| Length | 150.4 in · 3,820 mm |
| Width | 85.9 in · 2,183 mm |
| Height to top | 101.6 in · 2,580 mm |
| Ground clearance | 16.1 in · 408 mm |
| Front track | 59.1–65.0 in · 1,500–1,650 mm |
| Rear track | 59.1–63.0 in · 1,500–1,600 mm |
| Turning radius with brakes | 15.1 ft · 4.60 m |
| Turning radius without brakes | 17.4 ft · 5.29 m |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.65”
How much does a DX 3.65 weigh?
A DX 3.65 weighs 7,496 lb (3,400 kg) unballasted.
| Weight, unballasted | 7,496 lb · 3,400 kg |
|---|---|
| Maximum permissible mass | 11,023 lb · 5,000 kg |
| Maximum front axle load | 4,630 lb · 2,100 kg |
| Maximum rear axle load | 7,716 lb · 3,500 kg |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.65”
What tyres does a DX 3.65 take?
Tyre sizes for the DX 3.65 are below.
| Front tyre, standard | 12.4 R 24 AS |
|---|---|
| Rear tyre, standard | 16.9 R 34 AS |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.65”
Where this page comes from
15 dimension and weight values from Traktorenlexikon, “Deutz-Fahr DX 3.65”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.65 — CC BY-SA 4.0, WIKIBOOKS-TL-82425 · revision 964353. Wikibooks contributors (Traktorenlexikon). Original document