- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1986–1996
WhichTractor size, not the maker’s category
Deutz-Fahr DX 3.60 Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the DX 3.60.
Engine power, claimed · gross or net not stated
63.8 hp
47.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 3.60”, claimed
How much will a DX 3.60 lift?
A DX 3.60 lifts 5,291 lb (2,400 kg) at the lower-link ends.
| Hydraulic control | Constant flow |
|---|---|
| Pump flow | 10.8 gpm · 41.0 L/min |
| Steering pump flow | 7.1 gpm · 27 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 5,291 lb · 2,400 kg |
| Hitch control | Raising, lowering, neutral and floating position, position and draft control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.60”
What PTO does a DX 3.60 have?
A DX 3.60 has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 2,202 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| Front PTO available, optional | Yes |
| PTO power, claimed | 58.7 hp · 43.8 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.60”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 3.60”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.60 — CC BY-SA 4.0, WIKIBOOKS-TL-87925 · revision 1007587. Wikibooks contributors (Traktorenlexikon). Original document