- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1984–1996
It sits on the compact/utility boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Deutz-Fahr DX 3.30 Hydraulics & PTO specifications
14 hydraulics and PTO values on record for the DX 3.30.
Engine power, claimed · gross or net not stated
54 hp
40 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 3.30”, claimed
How much will a DX 3.30 lift?
A DX 3.30 lifts 4,699 lb (2,131 kg) at the lower-link ends.
| Pump flow | 10.0 gpm · 38.0 L/min |
|---|---|
| Steering pump flow | 2.4 gpm · 9.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Lift capacity at ball ends | 4,699 lb · 2,131 kg |
| Hitch control | Draft and position control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.30”
What PTO does a DX 3.30 have?
A DX 3.30 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,202 rpm |
| Rear PTO shaft | 1 3/8"-6 splines (Form-I) |
| Front PTO available, optional | Yes |
| PTO power, claimed | 47.5 hp · 35.5 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.30”
Where this page comes from
14 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 3.30”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.30 — CC BY-SA 4.0, WIKIBOOKS-TL-80975 · revision 1023408. Wikibooks contributors (Traktorenlexikon). Original document