- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1978–1983
WhichTractor size, not the maker’s category
Deutz-Fahr DX 110 Hydraulics & PTO specs
14 hydraulics and PTO values on record for the DX 110.
Engine power, claimed · gross or net not stated
101 hp
75 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 110”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a DX 110 lift?
A DX 110 lifts 11,354 lb (5,150 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 14.7 gpm · 55.7 L/min |
| Steering pump flow | 9.2 gpm · 34.7 L/min |
| Hydraulic pressure | 3,046–3,771 psi · 210–260 bar |
| Rear remote valves, optional | 3 |
| Lift capacity at ball ends | 11,354 lb · 5,150 kg |
| Hitch control | Top link control and Transfermatic system, position and draft control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 110”
What PTO does a DX 110 have?
A DX 110 has a 540 rpm / 1000 rpm rear PTO.
| Rear PTO independence | Independent |
|---|---|
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm / 1000 rpm |
| Engine speed at 540 PTO | 2,057 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Deutz-Fahr DX 110”
Sources and how this page was built
14 hydraulics and PTO values from Traktorenlexikon, “Deutz-Fahr DX 110”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 110 — CC BY-SA 4.0, WIKIBOOKS-TL-46616 · revision 1089858. Wikibooks contributors (Traktorenlexikon). Original document