- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1994–1995
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Case-Steyr M 9083 a Hydraulics & PTO specifications
8 hydraulics and PTO values on record for the M 9083 a.
Engine power, claimed · gross or net not stated
81.9 hp
61.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr M 9083 a”, claimed
How much will an M 9083 a lift?
An M 9083 a lifts 9,480 lb (4,300 kg) at the lower-link ends.
| Pump flow | 12.7 gpm · 48.1 L/min |
|---|---|
| Steering pump flow | 9.0 gpm · 34.0 L/min |
| Hydraulic pressure | 3,481 psi · 240 bar |
| Rear remote valves | 1 |
| Lift capacity at ball ends | 9,480 lb · 4,300 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Steyr M 9083 a”
What PTO does an M 9083 a have?
An M 9083 a has a 430/540/1000 rpm rear PTO.
| Rear PTO speeds | 430/540/1000 rpm |
|---|---|
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Steyr M 9083 a”
Where this page comes from
8 hydraulics and PTO values from Traktorenlexikon, “Steyr M 9083 a”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr M 9083 a — CC BY-SA 4.0, WIKIBOOKS-TL-108162 · revision 993751. Wikibooks contributors (Traktorenlexikon). Original document