- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- Lab tested ×1
- 2007–2011
WhichTractor size, not the maker’s category
Case-IH Puma 180 Hydraulics & PTO specifications
20 hydraulics and PTO values on record for the Puma 180.
Engine power, claimed · gross or net not stated
179.6 hp
133.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH Puma 180”, claimed
What hydraulics does a Puma 180 have?
Hydraulic and hitch specifications for the Puma 180 are below.
| Hydraulic centre | Closed centreSource 1 |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 35.9 gpm · 135.8 L/min |
| Hydraulic pressure | 2,756 psi · 190 bar |
| Rear remote valves | 4 |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Case-IH Puma 180”
What PTO does a Puma 180 have?
A Puma 180 has a 540E/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| Rear PTO speeds | 540E/1000 rpm |
| Rear PTO shaft | 34.9 mm, 6 splines / 34.9 mm, 21 splinesSource 1 |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH Puma 180”
How much power does a Puma 180 deliver at the PTO?
On OECD Test 2423, the Puma 180 delivered 179.8 hp (134.1 kW) at the PTO shaft, at maximum power.
| PTO power, at maximum power | 179.8 hp · 134.1 kWAt 882 PTO rpmAt 1,900 engine rpm |
|---|---|
| PTO power, at rated engine speed | 158.6 hp · 118.3 kWAt 1,022 PTO rpmAt 2,200 engine rpm |
| PTO power, at standard PTO speed | 164.4 hp · 122.6 kWAt 1,000 PTO rpmAt 2,153 engine rpm |
| PTO shaft speed, at maximum power | 882 rpm |
| PTO shaft speed, at rated engine speed | 1,022 rpm |
| PTO shaft speed, at standard PTO speed | 1,000 rpm |
| Hydraulic power, at maximum power | 38.1 hp · 28.4 kW |
| Hydraulic pump delivery, at maximum power | 25.7 gpm · 97.4 L/min |
| Three-point lift force | 11,375 lbf · 50.6 kN |
Source · OECD test report 2423, 2008
Where this page comes from
20 hydraulics and PTO values from OECD test report 2423, 2008; and Traktorenlexikon, “Case-IH Puma 180”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 423: Case IH Puma 180 — Licence not stated by the publisher; facts cited, OECD-2423 · published 2008-08-06 · retrieved 2026-09-14. OECD; testing station FJ-BLT, Wieselburg, Austria. Original document
- Traktorenlexikon: Case-IH Puma 180 — CC BY-SA 4.0, WIKIBOOKS-TL-115858 · revision 1001684. Wikibooks contributors (Traktorenlexikon). Original document