WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Lab tested ×2
  • 2004–2006

WhichTractor size, not the maker’s category

Case-IH MXU 110 Hydraulics & PTO specifications

20 hydraulics and PTO values on record for the MXU 110.

Measured at the PTO shaft

114.4 hp

Brochure claimed 108.5 hp difference +5%

Source · OECD Test 2240, measured

What hydraulics does an MXU 110 have?

Hydraulic and hitch specifications for the MXU 110 are below.

Hydraulics & hitch — MXU 110 Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Pump flow22.0 gpm · 83.3 L/min
Hydraulic pressure2,466 psi · 170 bar
Front hitch available, optionalYes

Source · Traktorenlexikon, “Case-IH MXU110”

What PTO does an MXU 110 have?

An MXU 110 has a 540E/540/1000 rpm rear PTO.

PTO — MXU 110 PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
Rear PTO speeds540E/540/1000 rpm
Engine speed at 540 PTO1,969 rpm
Rear PTO shaft34.9 mm, 6 splines / 34.9 mm, 21 splinesSource 2
Front PTO available, optionalYes
PTO power, claimed107.3 hp · 80.0 kWClaimed; standard not stated by the source

Source · Traktorenlexikon, “Case-IH MXU110”

How much power does an MXU 110 deliver at the PTO?

On OECD Test 2240, the MXU 110 delivered 114.4 hp (85.3 kW) at the PTO shaft, at maximum power.

OECD Test 2240 — MXU 110 as tested, configuration as printed: “4 WD · PBR7BC2 - 40 km/h”
PTO power, at maximum power114.4 hp · 85.3 kWAt 893 PTO rpmAt 1,893 engine rpm
PTO power, at rated engine speed102.2 hp · 76.2 kWAt 1,037 PTO rpmAt 2,198 engine rpm
PTO power, at standard PTO speed107.3 hp · 80.0 kWAt 1,000 PTO rpmAt 2,119 engine rpm
PTO shaft speed, at maximum power893 rpm
PTO shaft speed, at rated engine speed1,037 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power36.7 hp · 27.4 kW
Hydraulic pump delivery, at maximum power24.8 gpm · 94.0 L/min
Three-point lift force7,958 lbf · 35.4 kN

Source · OECD test report 2240, 2005

How much PTO power did the MXU 110 deliver on Test 2245?

On OECD Test 2245, the MXU 110 delivered 114.7 hp (85.5 kW) at the PTO shaft, at maximum power.

OECD Test 2245 — MXU 110 as tested, configuration as printed: “4 WD · PBC7BC2 - 40 km/h”
PTO power, at maximum power114.7 hp · 85.5 kWAt 896 PTO rpmAt 1,899 engine rpm
PTO power, at rated engine speed102.9 hp · 76.7 kWAt 1,038 PTO rpmAt 2,201 engine rpm
PTO power, at standard PTO speed107.3 hp · 80.0 kWAt 1,000 PTO rpmAt 2,119 engine rpm
PTO shaft speed, at maximum power896 rpm
PTO shaft speed, at rated engine speed1,038 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power37.5 hp · 28.0 kW
Hydraulic pump delivery, at maximum power24.7 gpm · 93.4 L/min
Three-point lift force9,464 lbf · 42.1 kN

Source · OECD test report 2245, 2005

Where this page comes from

20 hydraulics and PTO values from OECD test report 2240, 2005; Traktorenlexikon, “Case-IH MXU110”; and OECD test report 2245, 2005.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 2/2 240: Case IH MXU 110 — Licence not stated by the publisher; facts cited, OECD-2240 · published 2005-05-11 · retrieved 2026-09-14. OECD; testing station SRI, Silsoe, United Kingdom. Original document
  2. OECD Code 2 test report 2/2 245: Case IH MXU 110 — Licence not stated by the publisher; facts cited, OECD-2245 · published 2005-05-17 · retrieved 2026-09-14. OECD; testing station SRI, Silsoe, United Kingdom. Original document
  3. Traktorenlexikon: Case-IH MXU110 — CC BY-SA 4.0, WIKIBOOKS-TL-115797 · revision 983655. Wikibooks contributors (Traktorenlexikon). Original document