WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×2
  • 1998–2002

WhichTractor size, not the maker’s category

Case-IH MX 150 Hydraulics & PTO specifications

20 hydraulics and PTO values on record for the MX 150.

Measured at the PTO shaft

142.7 hp

Brochure claimed 147.9 hp difference −4%

Source · OECD Test 1762, measured

How much will an MX 150 lift?

An MX 150 lifts 18,728 lb (8,495 kg) at the lower-link ends.

Hydraulics & hitch — MX 150 Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Three-point hitch categoryCategory 2
Lift capacity at ball ends18,728 lb · 8,495 kg
Front hitch available, optionalYes

Source · Traktorenlexikon, “Case-IH MX150”

What PTO does an MX 150 have?

An MX 150 has a 540/1000 rpm rear PTO.

PTO — MX 150 PTO
Rear PTO driveEngine-driven
Rear PTO independenceIndependent
PTO engages under loadYes
Rear PTO speeds540/1000 rpm
Engine speed at 540 PTO1,875 rpm
Rear PTO shaft35 mm, 6 splines / 35 mm, 21 splinesSource 1
Front PTO available, optionalYes

Source · Traktorenlexikon, “Case-IH MX150”

How much power does an MX 150 deliver at the PTO?

On OECD Test 1762, the MX 150 delivered 142.7 hp (106.4 kW) at the PTO shaft, at maximum power.

OECD Test 1762 — MX 150 as tested, configuration as printed: “4 WD · Series MAXXUM - 30 km/h”
PTO power, at maximum power142.7 hp · 106.4 kWAt 860 PTO rpmAt 1,900 engine rpm
PTO power, at rated engine speed130.6 hp · 97.4 kWAt 1,000 PTO rpmAt 2,209 engine rpm
PTO power, at standard PTO speed130.6 hp · 97.4 kWAt 1,000 PTO rpmAt 2,209 engine rpm
PTO shaft speed, at maximum power860 rpm
PTO shaft speed, at rated engine speed1,000 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power25.7 hp · 19.2 kW
Hydraulic pump delivery, at maximum power22.5 gpm · 85.3 L/min
Three-point lift force14,006 lbf · 62.3 kN

Source · OECD test report 1762, 1998

How much PTO power did the MX 150 deliver on Test 1763?

On OECD Test 1763, the MX 150 delivered 142.7 hp (106.4 kW) at the PTO shaft, at maximum power.

OECD Test 1763 — MX 150 as tested, configuration as printed: “4 WD · Series MAXXUM - 40 km/h”
PTO power, at maximum power142.7 hp · 106.4 kWAt 860 PTO rpmAt 1,900 engine rpm
PTO power, at rated engine speed130.6 hp · 97.4 kWAt 1,000 PTO rpmAt 2,209 engine rpm
PTO power, at standard PTO speed130.6 hp · 97.4 kWAt 1,000 PTO rpmAt 2,209 engine rpm
PTO shaft speed, at maximum power860 rpm
PTO shaft speed, at rated engine speed1,000 rpm
PTO shaft speed, at standard PTO speed1,000 rpm
Hydraulic power, at maximum power25.7 hp · 19.2 kW
Hydraulic pump delivery, at maximum power22.5 gpm · 85.3 L/min
Three-point lift force14,006 lbf · 62.3 kN

Source · OECD test report 1763, 1998

Where this page comes from

20 hydraulics and PTO values from OECD test report 1762, 1998; Traktorenlexikon, “Case-IH MX150”; and OECD test report 1763, 1998.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1/1 762: Case IH MX 150 — Licence not stated by the publisher; facts cited, OECD-1762 · published 1998-05-28 · retrieved 2026-09-14. OECD; testing station BLT, Wieselburg, Austria. Original document
  2. OECD Code 2 test report 1/1 763: Case IH MX 150 — Licence not stated by the publisher; facts cited, OECD-1763 · published 1998-05-28 · retrieved 2026-09-14. OECD; testing station BLT, Wieselburg, Austria. Original document
  3. Traktorenlexikon: Case-IH MX150 — CC BY-SA 4.0, WIKIBOOKS-TL-115646 · revision 1009309. Wikibooks contributors (Traktorenlexikon). Original document