Case-IH JX1090U Hydraulics & PTO specifications

A JX1090U lifts 11,155 lb (5,060 kg) at the lower-link ends.

A JX1090U has a 540E/540/1000 rpm rear PTO.

On OECD Test 2279, the JX1090U delivered 83.3 hp (62.1 kW) at the PTO shaft, at maximum power.

24 hydraulics and PTO values on record for the JX1090U.

Measured at the PTO shaft

83.3 hp

Source · OECD Test 2279, measured

How much will a JX1090U lift?

A JX1090U lifts 11,155 lb (5,060 kg) at the lower-link ends.

Hydraulics & hitch — JX1090U Hydraulics & hitch
Hydraulic control	Load sensingOn record for 1 of 3 configurations
Pump flow	16.5 gpm · 62.3 L/minOn record for 1 of 3 configurations
Steering pump flow	7.9 gpm · 30.0 L/minOn record for 1 of 3 configurations
Hydraulic pressure	2,031 psi · 140 barOn record for 1 of 3 configurations
Lift capacity at ball ends	11,155 lb · 5,060 kgOn record for 1 of 3 configurations
Hitch control	Position, draft and mixed control, vibration dampingOn record for 1 of 3 configurations
Front hitch available, optional	YesOn record for 1 of 3 configurations

Source · Traktorenlexikon, “Case-IH JX1090U”

A JX1090U has a 540E/540/1000 rpm rear PTO.

PTO — JX1090U PTO
Rear PTO drive	Engine-drivenOn record for 1 of 3 configurations
Ground-speed PTO	YesOn record for 1 of 3 configurations
Rear PTO independence	IndependentOn record for 1 of 3 configurations
Rear PTO speeds	540E/540/1000 rpm
Engine speed at 540 PTO	2,199 rpmOn record for 1 of 3 configurations
Rear PTO shaft	35 mm, 6 splines / 35 mm, 21 splines^{Source 1}
Front PTO available, optional	YesOn record for 1 of 3 configurations
PTO power, claimed	74.6 hp · 55.6 kWOn record for 1 of 3 configurationsClaimed; standard not stated by the source

Source · Traktorenlexikon, “Case-IH JX1090U”

On OECD Test 2279, the JX1090U delivered 83.3 hp (62.1 kW) at the PTO shaft, at maximum power.

OECD Test 2279 — JX1090U as tested, configuration as printed: “4 WD · T3C6T1 - 12 speeds - 40 km/h”
PTO power, at maximum power	83.3 hp · 62.1 kWAt 1,007 PTO rpmAt 2,398 engine rpm
PTO power, at rated engine speed	82.6 hp · 61.6 kWAt 1,051 PTO rpmAt 2,502 engine rpm
PTO power, at standard PTO speed	83.3 hp · 62.1 kWAt 1,007 PTO rpmAt 2,398 engine rpm
PTO shaft speed, at maximum power	1,007 rpm
PTO shaft speed, at rated engine speed	1,051 rpm
PTO shaft speed, at standard PTO speed	1,007 rpm
Hydraulic power, at maximum power	20.9 hp · 15.6 kW
Hydraulic pump delivery, at maximum power	14.5 gpm · 55.0 L/min
Three-point lift force	7,216 lbf · 32.1 kN

Source · OECD test report 2279, 2005

24 hydraulics and PTO values from Traktorenlexikon, “Case-IH JX1090U”; and OECD test report 2279, 2005.

Last verified

Not yet verified

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

OECD Code 2 test report 1/2 279: Case IH JX1090U — Licence not stated by the publisher; facts cited, OECD-2279 · published 2005-10-14 · retrieved 2026-09-14. OECD; testing station IMAMOTER, Torino, Italy. Original document
Traktorenlexikon: Case-IH JX1090U — CC BY-SA 4.0, WIKIBOOKS-TL-115786 · revision 1001675. Wikibooks contributors (Traktorenlexikon). Original document