- Rigid chassis
- WhichTractor size: High-power
- Not independently tested
- 1997–1999
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-IH 7250 PRO/8950 Full specifications
CUMMINS 6 TA-830 six-cylinder diesel. The manufacturer claimed 257 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
257 hp
192 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”, claimed
- Weight
- 18,338 lb
- 3-point lift
- 16,204 lb
- Hyd. flow
- 29.7 gpm
- Top speed
- 18.6–24.9 mph
Case-IH 7250 PRO/8950 specs: key facts
The Case-IH 7250 PRO/8950 was built from 1997 to 1999.
The Case-IH 7250 PRO/8950 has a claimed engine power (gross or net not stated) of 192 kW (257 hp); it has no measured PTO figure.
The Case-IH 7250 PRO/8950 is four-wheel drive (4WD).
The Case-IH 7250 PRO/8950 has a CUMMINS 6 TA-830 engine, a 6-cylinder 8.27 L diesel unit.Source 1
The Case-IH 7250 PRO/8950 weighs 8,318 kg (18,338 lb) unladen.
The Case-IH 7250 PRO/8950 has a rear PTO running at 1000 rpm.
The three-point hitch of the Case-IH 7250 PRO/8950 lifts 7,350 kg (16,204 lb) at the lower-link ends.
The hydraulic pump of the Case-IH 7250 PRO/8950 delivers 112.4 L/min (29.7 gpm).
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
How much horsepower does a 7250 PRO/8950 have?
The only figure for the 7250 PRO/8950 is 257 hp (192 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
What engine is in a 7250 PRO/8950?
A 7250 PRO/8950 has a CUMMINS 6 TA-830, a 6-cylinder 8.27 L diesel engine.
| Make & model | CUMMINS 6 TA-830Source 1 |
|---|---|
| Cylinders | 6, liquid-cooledSource 1 |
| Displacement | 504.5 ci · 8.27 LSource 1 |
| Max torque | 771 lb·ft · 1,046 N·m @ 1,400 rpm |
| Injection | Direct fuel injection with a Bosch in-line injection pump |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
How much will a 7250 PRO/8950 lift, and what is its hydraulic flow?
A 7250 PRO/8950 lifts 16,204 lb (7,350 kg) at the lower-link ends of its Category 3 three-point hitch.
| Pump flow | 29.7 gpm · 112.4 L/min |
|---|---|
| Pressure | 2,451 psi · 169 bar |
| Hitch category | Category 3 |
| Lift at ends | 16,204 lb · 7,350 kg |
| Rear PTO | 1000 rpm |
| PTO shaft | 1 3/8"- 21 teilig |
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
What transmission does a 7250 PRO/8950 have?
Transmission specifications for the 7250 PRO/8950 are below.
| Clutch | Oil-immersed multi-plate clutch |
|---|---|
| Brakes | Pedal-operated hydraulic full disc brake designed as individual wheel brake |
| Steering | Hydrostatic Eaton steering with two integrated double-acting steering cylinders |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
How much does a 7250 PRO/8950 weigh?
A 7250 PRO/8950 weighs 18,338 lb (8,318 kg) unladen.
| Unladen weight | 18,338 lb · 8,318 kg |
|---|---|
| Maximum permissible mass | 25,519 lb · 11,575 kg |
| Wheelbase | 118.3 in · 3,006 mm |
| Length | 200.4 in · 5,090 mm |
| Width | 120.0 in · 3,048 mm |
| Height | 121.1 in · 3,077 mm |
| Ground clearance | 19.3 in · 489 mm |
| Front track | 60.1–88.0 in · 1,527–2,235 mm |
| Rear track | 64.0–132.0 in · 1,626–3,353 mm |
Source · Traktorenlexikon, “Case-IH 7250 PRO/8950”
Which tractors compare with a 7250 PRO/8950?
Within 10% of its 227.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Steyr-Case 9270 a227.2 hp PTO, claimed · 1997–1999Side by side with the 7250 PRO/8950 →
- Ford 8970224.5 hp PTO, claimed · 1993–1999Side by side with the 7250 PRO/8950 →
- New Holland 8970 A224.5 hp PTO, claimed · 1993–2002Side by side with the 7250 PRO/8950 →
- New Holland-Fiat G 240224.5 hp PTO, claimed · 1993–2002Side by side with the 7250 PRO/8950 →
- Massey Ferguson MF 8460231.2 hp PTO, claimed · 2004–2008Side by side with the 7250 PRO/8950 →
- Massey Ferguson MF 8280 A231.3 hp PTO, claimed · 1999–2002Side by side with the 7250 PRO/8950 →
Everything else people ask
Is a 7250 PRO/8950 two-wheel drive or four-wheel drive?
The Case-IH 7250 PRO/8950 is four-wheel drive (4WD).
What PTO does a 7250 PRO/8950 have?
A 7250 PRO/8950 has a 1000 rpm rear PTO on a 1 3/8"- 21 teilig shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 7230 PRO/8930”; and Traktorenlexikon, “Case-IH 7250 PRO/8950”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 7230 PRO/8930 — CC BY-SA 4.0, WIKIBOOKS-TL-90517 · revision 977810. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH 7250 PRO/8950 — CC BY-SA 4.0, WIKIBOOKS-TL-90530 · revision 977822. Wikibooks contributors (Traktorenlexikon). Original document