- WhichTractor size: High-power
- No lab test on file
- 1990–1994
WhichTractor size, not the maker’s category
Case-IH 9260 Hydraulics & PTO specs
10 hydraulics and PTO values on record for the 9260.
Engine power, claimed · gross or net not stated
296.0 hp
220.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 9260”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 9260 lift?
A 9260 lifts 14,703 lb (6,669 kg) at the lower-link ends.
| Pump flow | 28.0 gpm · 106.0 L/min |
|---|---|
| Hydraulic pressure | 2,306 psi · 159 bar |
| Rear remote valves | 8 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 14,703 lb · 6,669 kg |
Source · Traktorenlexikon, “Case-IH 9260”
What PTO does a 9260 have?
A 9260 has a 1000 rpm rear PTO.
| Rear PTO drive, optional | Engine-driven |
|---|---|
| Rear PTO independence, optional | Independent |
| PTO engages under load, optional | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 splined |
Source · Traktorenlexikon, “Case-IH 9260”
Sources and how this page was built
10 hydraulics and PTO values from Traktorenlexikon, “Case-IH 9260”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 9260 — CC BY-SA 4.0, WIKIBOOKS-TL-115587 · revision 978459. Wikibooks contributors (Traktorenlexikon). Original document