- Articulated
- WhichTractor size: High-power
- Not independently tested
- 1990–1995
WhichTractor size, not the maker’s category
Case-IH 9250 Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 9250.
Engine power, claimed · gross or net not stated
296.0 hp
220.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 9250”, claimed
How much will a 9250 lift?
A 9250 lifts 14,074 lb (6,384 kg) at the lower-link ends.
| Pump flow | 27.8 gpm · 105.2 L/min |
|---|---|
| Hydraulic pressure | 2,306 psi · 159 bar |
| Rear remote valves | 4 |
| Three-point hitch category | Category 3 |
| Lift capacity at ball ends | 14,074 lb · 6,384 kg |
Source · Traktorenlexikon, “Case-IH 9250”
What PTO does a 9250 have?
A 9250 has a 1000 rpm rear PTO.
| Rear PTO drive, optional | Engine-driven |
|---|---|
| Rear PTO independence, optional | Independent |
| PTO engages under load, optional | Yes |
| Rear PTO speeds | 1000 rpm |
| Rear PTO shaft | 1 3/4"- 20 splined |
| PTO power, claimed | 266.1 hp · 198.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Case-IH 9250”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Case-IH 9250”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 9250 — CC BY-SA 4.0, WIKIBOOKS-TL-115586 · revision 978460. Wikibooks contributors (Traktorenlexikon). Original document