6 material differences · fewer than 12
Tractor oneCase-IH 91301987–1990No measured PTO figureTractor twoMassey Ferguson MF 48001980–1986No measured PTO figure
Which should you choose?
Read our verdict on the 9130 and the MF 4800 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 9130 | MF 4800 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 217.0 hp | 221.9 hp | — |
| Engine declared | CUMMINS 6 CTA-8.3 | Cummins V-903 | differs |
| Displacement declared | 8.27 L | 14.80 L | +79% MF 4800 |
| Maximum torque declared | 646 lb·ft · 876 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 19.2 mph · 30.9 km/h | — |
| Clutch declared | Oil immersed multi-plate driving clutch with disc diameter | wet disc clutch with 14 inch plates | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 28.3 gpm · 107.1 L/min | — | — |
| Pressure declared | 2,306 psi · 159 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 21,076 lb · 9,560 kg | 26,059 lb · 11,820 kg | +24% MF 4800 |
| Wheelbase declared | 120.4 in · 3,058 mm | 133.9 in · 3,400 mm | +11% MF 4800 |
| Length declared | 244.5 in · 6,210 mm | 252.0 in · 6,400 mm | — |
| Width declared | 119.7–148.0 in · 3,040–3,760 mm | 106.3 in · 2,700 mm | differs |
| Ground clearance declared | 14.5 in · 368 mm | — | — |
| Turning radius, braked declared | 19.4 ft · 5.91 m | — | — |
| Fuel tank declared | 459.7 qt · 435.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 9130 sources
- Source: Traktorenlexikon, “Case-IH 9130”
Massey Ferguson MF 4800 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4800”
- Source: Traktorenlexikon, “Ford FW-30”