WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1993–1998

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Case-IH 3230 specs: hp, weight, years

IHC D-206 four-cylinder diesel. The manufacturer claimed 59.1 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

59.1 hp

44.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Case-IH 3230”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,151 lb
3-point lift
5,401 lb
Hyd. flow
16.4 gpm
Top speed
18.6 mph

Case-IH 3230 specs: key facts

  • The Case-IH 3230 was built from 1993 to 1998.

  • The Case-IH 3230 has a claimed engine power (gross or net not stated) of 44.1 kW (59.1 hp); it has no measured PTO figure.

  • The Case-IH 3230 was offered in two-wheel-drive and four-wheel-drive versions.

  • The Case-IH 3230 has a IHC D-206 engine, a 4-cylinder 3.38 L diesel unit.

  • The Case-IH 3230 weighs 2,790 kg (6,151 lb) unladen.

  • The Case-IH 3230 has a rear PTO running at 540 rpm / 1000 rpm.

  • The three-point hitch of the Case-IH 3230 lifts 2,450 kg (5,401 lb) at the lower-link ends.

  • The hydraulic pump of the Case-IH 3230 delivers 62.2 L/min (16.4 gpm).

Source · Traktorenlexikon, “Case-IH 3230”

How does the 3230 compare with its class?

  • Strength:

    A hydraulic pump flow of 62.2 L/min is high for its class — 87% above the median of 33.2 L/min across the 313 machines within 10% of its power that hold this figure.

  • Strength:

    A 112 L fuel tank is high for its class — 58% above the median of 70.8 L across the 360 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 376 comparable records. How we work this out

Illustration of the 1993–1998 Case-IH 3230, a 59 hp farm tractor, four-wheel-drive version · operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version · operator station not recorded — shown as an open platform

How much horsepower does a 3230 have?

The only figure for the 3230 is 59.1 hp (44.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
59.1 hp

Source · Traktorenlexikon, “Case-IH 3230”

What engine is in a 3230?

A 3230 has an IHC D-206, a 4-cylinder 3.38 L diesel engine.

Engine — 3230 engine specifications
Make & modelIHC D-206
Cylinders4, liquid-cooled
Displacement206.4 ci · 3.38 L
Max torque162 lb·ft · 220 N·m @ 1,400 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Case-IH 3230”

How much will a 3230 lift, and what is its hydraulic flow?

A 3230 lifts 5,401 lb (2,450 kg) at the lower-link ends.

Hydraulics & PTO — 3230 hydraulics and PTO specifications
Pump flow16.4 gpm · 62.2 L/min
Pressure2,698 psi · 186 bar
Lift at ends5,401 lb · 2,450 kg
Rear PTO540 rpm / 1000 rpm @ 1,920 engine rpm
PTO shaft1 3/8"- 6 splines and 1 3/8"- 21 parts

Source · Traktorenlexikon, “Case-IH 3230”

What transmission does a 3230 have?

Transmission specifications for the 3230 are below.

Transmission — 3230 transmission specifications
ClutchPedal operated dry single disc clutch
SteeringHydrostatic Danfoss steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Case-IH 3230”

How much does a 3230 weigh?

A 3230 weighs 6,151 lb (2,790 kg) unladen.

Weights & dimensions — 3230 weights and dimensions
Unladen weight6,151 lb · 2,790 kgDT: 3,130
Wheelbase84.5 in · 2,146 mmDT: 2,235
Length143.0 in · 3,632 mm
Width73.2 in · 1,860 mm
Height102.0 in · 2,591 mm
Ground clearance22.5 in · 571 mmDT: 515
Front track52.0–80.0 in · 1,320–2,032 mmDT: 1,364-1,824
Rear track56.1–75.8 in · 1,425–1,925 mm
Turning radius, braked11.8 ft · 3.60 mDT: 4,000

Source · Traktorenlexikon, “Case-IH 3230”

What oil does a 3230 take, and how much?

A 3230 engine takes 10.0 qt (9.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

3230 fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.0 qt · 9.5 LSource: Traktorenlexikon, “Case-IH 3230” · single source, not independently verified
Transmission36.0 qt · 34.1 LSource: Traktorenlexikon, “Case-IH 3230” · single source, not independently verified
Front axle4.8 qt · 4.5 LSource: Traktorenlexikon, “Case-IH 3230” · single source, not independently verified
Cooling system14.5 qt · 13.7 LSource: Traktorenlexikon, “Case-IH 3230” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 3230?

Within 10% of its 59.1 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Case-IH 3230

Is a 3230 two-wheel drive or four-wheel drive?

The Case-IH 3230 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 3230 have?

A 3230 has a 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Case-IH 3230”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Case-IH 3230 — CC BY-SA 4.0, WIKIBOOKS-TL-27258 · revision 975440. Wikibooks contributors (Traktorenlexikon). Original document