12 material differences
Tractor oneCase-IH 32301993–1998No measured PTO figureTractor twoFiat 60-86 (DT)1992–2000No measured PTO figure
Which should you choose?
Read our verdict on the 3230 and the 60-86 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3230 | 60-86 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 59.1 hp | 59.1 hp | — |
| Engine declared | IHC D-206 | FIAT-IVECO 8035.05.208 (309) | differs |
| Displacement declared | 3.38 L | 2.93 L | +15% 3230 |
| Maximum torque declared | 162 lb·ft · 220 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | Pedal operated dry single disc clutch | Dry LuK double clutch type 11/11" | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 16.4 gpm · 62.2 L/min | 10.6 gpm · 40.0 L/min | +56% 3230 |
| Pressure declared | 2,698 psi · 186 bar | 3,118 psi · 215 bar | +16% 60-86 (DT) |
| Three-point lift, at the coupling points declared | 5,401 lb · 2,450 kg | 5,236 lb · 2,375 kg | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,151 lb · 2,790 kg | 4,149 lb · 1,882 kg | +48% 3230 |
| Wheelbase declared | 84.5 in · 2,146 mm | 72.6 in · 1,844 mm | +16% 3230 |
| Length declared | 143.0 in · 3,632 mm | 128.9 in · 3,275 mm | +11% 3230 |
| Width declared | 73.2 in · 1,860 mm | 60.6 in · 1,540 mm | +21% 3230 |
| Ground clearance declared | 22.5 in · 571 mm | 12.9 in · 327 mm | +75% 3230 |
| Turning radius, braked declared | 11.8 ft · 3.60 m | — | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 47.6 qt · 45.0 L | +149% 3230 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Case-IH 3230 sources
Source
- Source: Traktorenlexikon, “Case-IH 3230”
Fiat 60-86 (DT) sources
Source
- Source: Traktorenlexikon, “Fiatagri 60-86 V/60-86 V/DT”