• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1953–1959

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

BOLINDER-MUNKTELL BM-55 specs: hp, weight, years

BOLINDER-MUNKTELL 1054 four-cylinder diesel. The manufacturer claimed 56.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

56.2 hp

41.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
7,145 lb
3-point lift
5,291 lb
Hyd. flow
7.1 gpm
Top speed
18.6 mph

BOLINDER-MUNKTELL BM-55 specs: key facts

  • The BOLINDER-MUNKTELL BM-55 was built from 1953 to 1959.

  • The BOLINDER-MUNKTELL BM-55 has a claimed engine power (gross or net not stated) of 41.9 kW (56.2 hp); it has no measured PTO figure.

  • The BOLINDER-MUNKTELL BM-55 is two-wheel drive (2WD).

  • The BOLINDER-MUNKTELL BM-55 has a BOLINDER-MUNKTELL 1054 engine, a 4-cylinder 4.48 L diesel unit.

  • The BOLINDER-MUNKTELL BM-55 weighs 3,241 kg (7,145 lb) unladen.

  • The BOLINDER-MUNKTELL BM-55 has a rear PTO running at 540 rpm.

  • The three-point hitch of the BOLINDER-MUNKTELL BM-55 lifts 2,400 kg (5,291 lb) at the lower-link ends.

  • The hydraulic pump of the BOLINDER-MUNKTELL BM-55 delivers 26.8 L/min (7.1 gpm).

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

How does the BM-55 compare with its class?

  • Strength:

    A maximum engine torque of 265 N·m is high for its class — 35% above the median of 196 N·m across the 272 machines within 10% of its power that hold this figure.

  • Limitation:

    Five forward gears is low for its class — 50% below the median of 10 across the 337 machines within 10% of its power that hold this figure.

  • Strength:

    A 110 L fuel tank is high for its class — 57% above the median of 70 L across the 324 machines within 10% of its power that hold this figure.

  • Worth knowing:

    An unladen mass of 3,241 kg is high for its class — 28% above the median of 2,540 kg across the 341 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 341 comparable records. How we work this out

BOLINDER-MUNKTELL BM-55 tractor
Photo: Alf van Beem, CC0 via Wikimedia Commons · Wrong photo?

How much horsepower does a BM-55 have?

The only figure for the BM-55 is 56.2 hp (41.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
56.2 hp

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

What engine is in a BM-55?

A BM-55 has a BOLINDER-MUNKTELL 1054, a 4-cylinder 4.48 L diesel engine.

Engine — BM-55 engine specifications
Make & modelBOLINDER-MUNKTELL 1054
Cylinders4, liquid-cooled
Displacement273.6 ci · 4.48 L
Max torque195 lb·ft · 265 N·m @ 1,100 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

How much will a BM-55 lift, and what is its hydraulic flow?

A BM-55 lifts 5,291 lb (2,400 kg) at the lower-link ends.

Hydraulics & PTO — BM-55 hydraulics and PTO specifications
Pump flow7.1 gpm · 26.8 L/min
Pressure1,276 psi · 88 bar
Lift at ends5,291 lb · 2,400 kg
Rear PTOtransmission-driven, 540 rpm @ 1,500 engine rpm

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

What transmission does a BM-55 have?

Transmission specifications for the BM-55 are below.

Transmission — BM-55 transmission specifications
ClutchPedal-operated dry single-plate clutch
SteeringMechanical steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

How much does a BM-55 weigh?

A BM-55 weighs 7,145 lb (3,241 kg) unladen.

Weights & dimensions — BM-55 weights and dimensions
Unladen weight7,145 lb · 3,241 kg
Wheelbase85.6 in · 2,175 mm
Length135.8 in · 3,450 mm
Width74.8 in · 1,900 mm
Height94.5 in · 2,400 mm
Ground clearance16.9 in · 430 mm
Front track52.4 in · 1,330 mm
Rear track59.4 in · 1,510 mm

Source · Traktorenlexikon, “Bolinder-Munktell BM 55”

What oil does a BM-55 take, and how much?

A BM-55 engine takes 12.7 qt (12.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

BM-55 fluid capacities, grades and service intervals
SystemCapacity
Engine oil12.7 qt · 12.0 LSource: Traktorenlexikon, “Bolinder-Munktell BM 55” · single source, not independently verified
Transmission58.1 qt · 55.0 LSource: Traktorenlexikon, “Bolinder-Munktell BM 55” · single source, not independently verified
Cooling system9.5 qt · 9.0 LSource: Traktorenlexikon, “Bolinder-Munktell BM 55” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a BM-55?

Within 10% of its 38.5 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the BOLINDER-MUNKTELL BM-55

Is a BM-55 two-wheel drive or four-wheel drive?

The BOLINDER-MUNKTELL BM-55 is two-wheel drive (2WD).

What PTO does a BM-55 have?

A BM-55 has a 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Bolinder-Munktell BM 55”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Bolinder-Munktell BM 55 — CC BY-SA 4.0, WIKIBOOKS-TL-116161 · revision 1001557. Wikibooks contributors (Traktorenlexikon). Original document