- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1987–1991
WhichTractor size, not the maker’s category
AGRIFULL A-140 DT Turbo Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the A-140 DT Turbo.
Engine power, claimed · gross or net not stated
138 hp
103 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Agrifull A-140 Turbo”, claimed
What hydraulics does an A-140 DT Turbo have?
Hydraulic and hitch specifications for the A-140 DT Turbo are below.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 13.4 gpm · 50.8 L/min |
| Steering pump flow | 5.0 gpm · 19.0 L/min |
| Hydraulic pressure | 3,046–3,118 psi · 210–215 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity 610 mm behind ends | 7,385 lb · 3,350 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Agrifull A-140 Turbo”
What PTO does an A-140 DT Turbo have?
An A-140 DT Turbo has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,261 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 126.6 hp · 94.4 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Agrifull A-140 Turbo”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “Agrifull A-140 Turbo”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Agrifull A-140 Turbo — CC BY-SA 4.0, WIKIBOOKS-TL-122114 · revision 1079106. Wikibooks contributors (Traktorenlexikon). Original document