- Orchard & vineyard, Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1980–1986
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
AGRIFULL 80-70 F (DT) specs: hp, weight, years
FIAT-IVECO 8045.00 four-cylinder diesel. The manufacturer claimed 67 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
67 hp
50 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Agrifull 80-70 F”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 4,916 lb
- 3-point lift
- 2,978 lb
- Hyd. flow
- 5.8 gpm
- Top speed
- 15.5 mph
AGRIFULL 80-70 F (DT) specs: key facts
The AGRIFULL 80-70 F (DT) was built from 1980 to 1986.
The AGRIFULL 80-70 F (DT) has a claimed engine power (gross or net not stated) of 50 kW (67 hp); it has no measured PTO figure.
The AGRIFULL 80-70 F (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The AGRIFULL 80-70 F (DT) has a FIAT-IVECO 8045.00 engine, a 4-cylinder 3.46 L diesel unit.
The AGRIFULL 80-70 F (DT) weighs 2,230 kg (4,916 lb) unladen.
The AGRIFULL 80-70 F (DT) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the AGRIFULL 80-70 F (DT) lifts 1,351 kg (2,978 lb) at the lower-link ends.
The hydraulic pump of the AGRIFULL 80-70 F (DT) delivers 22.0 L/min (5.8 gpm).
Source · Traktorenlexikon, “Agrifull 80-70 F”
How does the 80-70 F (DT) compare with its class?
- Limitation:
A three-point lift at the lower links of 1,351 kg is low for its class — 48% below the median of 2,600 kg across the 256 machines within 10% of its power that hold this figure.
- Limitation:
A hydraulic pump flow of 22 L/min is low for its class — 41% below the median of 37.2 L/min across the 291 machines within 10% of its power that hold this figure.
- Limitation:
A 50 L fuel tank is low for its class — 39% below the median of 82 L across the 328 machines within 10% of its power that hold this figure.
- Worth knowing:
An unladen mass of 2,230 kg is low for its class — 22% below the median of 2,860 kg across the 356 machines within 10% of its power that hold this figure.
Derived by WhichTractor from 356 comparable records. How we work this out
How much horsepower does an 80-70 F (DT) have?
The only figure for the 80-70 F (DT) is 67 hp (50 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Agrifull 80-70 F”
What engine is in an 80-70 F (DT)?
An 80-70 F (DT) has a FIAT-IVECO 8045.00, a 4-cylinder 3.46 L diesel engine.
| Make & model | FIAT-IVECO 8045.00 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 210.9 ci · 3.46 L |
| Max torque | 162 lb·ft · 219 N·m @ 1,300 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Agrifull 80-70 F”
How much will an 80-70 F (DT) lift, and what is its hydraulic flow?
An 80-70 F (DT) lifts 2,978 lb (1,351 kg) at the lower-link ends.
| Pump flow | 5.8 gpm · 22.0 L/min |
|---|---|
| Pressure | 3,118 psi · 215 bar |
| Lift at ends | 2,978 lb · 1,351 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpmEngages under loadGround-speed PTO available |
Source · Traktorenlexikon, “Agrifull 80-70 F”
What transmission does an 80-70 F (DT) have?
Transmission specifications for the 80-70 F (DT) are below.
| Steering | Hydrostatic steering with double-acting steering cylinder |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Agrifull 80-70 F”
How much does an 80-70 F (DT) weigh?
An 80-70 F (DT) weighs 4,916 lb (2,230 kg) unladen.
| Unladen weight | 4,916 lb · 2,230 kgDT: 2,440 |
|---|---|
| Wheelbase | 79.5 in · 2,020 mmDT: 2,130 |
| Length | 141.7 in · 3,600 mm |
| Width | 53.9–77.6 in · 1,370–1,970 mm |
| Height | 57.9 in · 1,470 mm |
| Ground clearance | 14.2 in · 360 mmDT: 320 |
| Front track | 46.5–62.2 in · 1,180–1,580 mmDT: 1,160-1,230 |
| Rear track | 39.0–62.6 in · 990–1,590 mm |
Source · Traktorenlexikon, “Agrifull 80-70 F”
What oil does an 80-70 F (DT) take, and how much?
An 80-70 F (DT) engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.4 qt · 7.0 LSource: Traktorenlexikon, “Agrifull 80-70 F” · single source, not independently verified |
| Transmission & hydraulic | 50.5 qt · 47.8 LSource: Traktorenlexikon, “Agrifull 80-70 F” · single source, not independently verified |
| Front axle | 1.7 qt · 1.6 LSource: Traktorenlexikon, “Agrifull 80-70 F” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Common questions about the AGRIFULL 80-70 F (DT)
Is an 80-70 F (DT) two-wheel drive or four-wheel drive?
The AGRIFULL 80-70 F (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an 80-70 F (DT) have?
An 80-70 F (DT) has a independent 540/1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Agrifull 80-70 F”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Agrifull 80-70 F — CC BY-SA 4.0, WIKIBOOKS-TL-122090 · revision 1078945. Wikibooks contributors (Traktorenlexikon). Original document