- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1981–1986
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGRIFULL 80-50 (DT) Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 80-50 (DT).
Engine power, claimed · gross or net not stated
47.3 hp
35.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Agrifull 80-50”, claimed
How much will an 80-50 (DT) lift?
An 80-50 (DT) lifts 2,978 lb (1,351 kg) at the lower-link ends.
| Pump flow | 5.8 gpm · 22.0 L/min |
|---|---|
| Hydraulic pressure | 3,118 psi · 215 bar |
| Rear remote valves | 1 |
| Three-point hitch category | Category 1 |
| Lift capacity at ball ends | 2,978 lb · 1,351 kg |
| Hitch control | lifting lowering floating position draft mixture and position control |
Source · Traktorenlexikon, “Agrifull 80-50”
What PTO does an 80-50 (DT) have?
An 80-50 (DT) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| Rear PTO speeds | 540 rpm |
| Engine speed at 540 PTO | 2,160 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Agrifull 80-50”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Agrifull 80-50”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Agrifull 80-50 — CC BY-SA 4.0, WIKIBOOKS-TL-122085 · revision 1078909. Wikibooks contributors (Traktorenlexikon). Original document