- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 2006–2007
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Agco RT-100A Hydraulics & PTO specs
13 hydraulics and PTO values on record for the RT-100 A.
Engine power, claimed · gross or net not stated
126.2 hp
94.1 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO RT 100 A”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
What hydraulics does a RT-100 A have?
Hydraulic and hitch specifications for the RT-100 A are below.
| Hydraulic centre | Closed centre |
|---|---|
| Hydraulic control | Load sensing |
| Pump flow | 30.4 gpm · 115.1 L/min |
| Steering pump flow | 4.2 gpm · 16.0 L/min |
| Hydraulic pressure | 3,336 psi · 230 bar |
| Hitch control | Lifting, lowering, float and position, draft and mixed control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “AGCO RT 100 A”
What PTO does a RT-100 A have?
A RT-100 A has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,976 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “AGCO RT 100 A”
Sources and how this page was built
13 hydraulics and PTO values from Traktorenlexikon, “AGCO RT 100 A”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO RT 100 A — CC BY-SA 4.0, WIKIBOOKS-TL-122962 · revision 1089287. Wikibooks contributors (Traktorenlexikon). Original document