- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1994–1995
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
AGCO-ALLIS 9650 Full specifications
K.H.D. BF6L 913 C six-cylinder diesel. The manufacturer claimed 154.9 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
154.9 hp
115.5 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 9650”, claimed
- Weight
- 15,882 lb
- 3-point lift
- 6,962 lb
- Top speed
- 24.9 mph
AGCO-ALLIS 9650 specs: key facts
The AGCO-ALLIS 9650 was built from 1994 to 1995.
The AGCO-ALLIS 9650 has a claimed engine power (gross or net not stated) of 115.5 kW (154.9 hp); it has no measured PTO figure.
The AGCO-ALLIS 9650 was offered in two-wheel-drive and four-wheel-drive versions.
The AGCO-ALLIS 9650 has a K.H.D. BF6L 913 C engine, a 6-cylinder 6.13 L diesel unit.Source 1
The AGCO-ALLIS 9650 weighs 7,204 kg (15,882 lb) unladen.
The AGCO-ALLIS 9650 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the AGCO-ALLIS 9650 lifts 3,158 kg (6,962 lb) at the lower-link ends.
Source · Traktorenlexikon, “AGCO-Allis 9650”
How much horsepower does a 9650 have?
The only figure for the 9650 is 154.9 hp (115.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “AGCO-Allis 9650”
What engine is in a 9650?
A 9650 has a K.H.D. BF6L 913 C, a 6-cylinder 6.13 L diesel engine.
| Make & model | K.H.D. BF6L 913 C |
|---|---|
| Cylinders | 6, air-cooledSource 2 |
| Displacement | 374.0 ci · 6.13 L |
| Max torque | 453 lb·ft · 614 N·m @ 1,701 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “AGCO-Allis 9630”
How much will a 9650 lift?
A 9650 lifts 6,962 lb (3,158 kg) at the lower-link ends.
| Pressure | 2,654 psi · 183 bar |
|---|---|
| Lift at ends | 6,962 lb · 3,158 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,198 engine rpm |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “AGCO-Allis 9650”
What transmission does a 9650 have?
Transmission specifications for the 9650 are below.
| Clutch | Hydraulically operated wet FUNK multi-disc clutch, type 9400 |
|---|---|
| Steering | Hydrostatic EATON steering, type 212-1065-001 |
| Top speed | 24.9 mph · 40 km/h |
Source · Traktorenlexikon, “AGCO-Allis 9650”
How much does a 9650 weigh?
A 9650 weighs 15,882 lb (7,204 kg) unladen.
| Unladen weight | 15,882 lb · 7,204 kg4 WD: 7,812 kg |
|---|---|
| Wheelbase | 123.2 in · 3,129 mm4 WD: 2,959 |
| Length | 187.5 in · 4,762 mm |
| Width | 96.0 in · 2,438 mm |
| Height | 123.5 in · 3,137 mm |
| Ground clearance | 23.0 in · 584 mm4 WD: 566 |
| Front track | 65.0–89.0 in · 1,651–2,261 mm1,516-2,322 |
| Rear track | 62.0–107.1 in · 1,575–2,720 mm |
| Turning radius, braked | 13.8 ft · 4.20 m4 WD: 4,500 |
Source · Traktorenlexikon, “AGCO-Allis 9650”
Which tractors compare with a 9650?
Within 10% of its 154.9 hp of claimed engine power, the same type, and first built within 15 years of it.
- AGCO-ALLIS 9455154.9 hp engine, claimed · 1994–1999Side by side with the 9650 →
- AGCO-ALLIS 9655154.9 hp engine, claimed · 1994–1998Side by side with the 9650 →
- Mercedes-Benz MB trac 1600 turbo154 hp engine, claimed · 1987–1991Side by side with the 9650 →
- Renault Ares 715 RZ153.9 hp engine, claimed · 2000–2002Side by side with the 9650 →
- Massey Ferguson MF 8130 A153.0 hp engine, claimed · 1995–1999Side by side with the 9650 →
- Massey Ferguson MF 3655 (A)153.0 hp engine, claimed · 1990–1995Side by side with the 9650 →
Everything else people ask
Is a 9650 two-wheel drive or four-wheel drive?
The AGCO-ALLIS 9650 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 9650 have?
A 9650 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “AGCO-Allis 9630”; and Traktorenlexikon, “AGCO-Allis 9650”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 9630 — CC BY-SA 4.0, WIKIBOOKS-TL-122847 · revision 1087403. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: AGCO-Allis 9650 — CC BY-SA 4.0, WIKIBOOKS-TL-122855 · revision 1087423. Wikibooks contributors (Traktorenlexikon). Original document