12 material differences

Tractor oneAGCO-ALLIS 96501994–1995No measured PTO figureTractor twoDeutz-Fahr Agrotron 1561998–2000No measured PTO figure

Which should you choose?

Read our verdict on the 9650 and the Agrotron 156 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 3 fields identical or within 5%, which is not counted as material

AGCO-ALLIS 9650 and Deutz-Fahr Agrotron 156, field by field
Field	9650	Agrotron 156	Gap
Engine
Engine power, claimed claimed	154.9 hp	153.9 hp	—
Engine declared	K.H.D. BF6L 913 C	Deutz BF6M 1013 E	differs
Displacement declared	6.13 L	7.15 L	+17% Agrotron 156
Maximum torque declared	453 lb·ft · 614 N·m	410 lb·ft · 556 N·m	+10% 9650
Transmission
Top speed declared	24.9 mph · 40 km/h	18.6–31.1 mph · 30–50 km/h	differs
Clutch declared	Hydraulically operated wet FUNK multi-disc clutch, type 9400	Electrohydraulically actuated wet ZF multi-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	21.9 gpm · 83.0 L/min	—
Pressure declared	2,654 psi · 183 bar	—	—
Three-point lift, at the coupling points declared	6,962 lb · 3,158 kg	20,371 lb · 9,240 kg	+193% Agrotron 156
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	15,882 lb · 7,204 kg	12,544 lb · 5,690 kg	+27% 9650
Maximum permissible mass declared	—	20,944 lb · 9,500 kg	—
Wheelbase declared	123.2 in · 3,129 mm	108.9 in · 2,767 mm	+13% 9650
Length declared	187.5 in · 4,762 mm	184.3 in · 4,680 mm	—
Width declared	96.0–135.2 in · 2,438–3,435 mm	83.9 in · 2,130 mm	differs
Height, over the cab declared	123.5 in · 3,137 mm	116.3 in · 2,955 mm	+6% 9650
Ground clearance declared	23.0 in · 584 mm	22.4 in · 570 mm	—
Turning radius, braked declared	13.8 ft · 4.20 m	—	—
Fuel tank declared	267.9 qt · 253.5 L	285.3 qt · 270 L	+7% Agrotron 156

Source

Source