- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1991–1996
It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGCO-ALLIS 7600 Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the 7600.
Engine power, claimed · gross or net not stated
95.6 hp
71.3 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “AGCO-Allis 7600”, claimed
How much will a 7600 lift?
A 7600 lifts 10,141 lb (4,600 kg) at the lower-link ends.
| Hydraulic centre | Open centre |
|---|---|
| Pump flow | 16.9 gpm · 64.0 L/min |
| Hydraulic pressure | 1,740 psi · 120 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 10,141 lb · 4,600 kg |
Source · Traktorenlexikon, “AGCO-Allis 7600”
What PTO does a 7600 have?
A 7600 has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,958 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
Source · Traktorenlexikon, “AGCO-Allis 7600”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “AGCO-Allis 7600”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: AGCO-Allis 7600 — CC BY-SA 4.0, WIKIBOOKS-TL-122654 · revision 1085986. Wikibooks contributors (Traktorenlexikon). Original document