VALMET 505/505-4 vs VALMET 6000-4

10 material differences · fewer than 12

Tractor one

1983–1989

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 505/505-4 and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 4 fields identical or within 5%, which is not counted as material

VALMET 505/505-4 and VALMET 6000-4, field by field
Field	505/505-4	6000-4	Gap
Engine
Engine power, claimed claimed	64.1 hp	74.0 hp	+15% 6000-4
Engine declared	VALMET TD 33 DS 5	VALMET 420 D	differs
Displacement declared	3.30 L	4.40 L	+33% 6000-4
Maximum torque declared	—	182 lb·ft · 247 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry LuK single-plate clutch	dry single-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	2,901 psi · 200 bar	2,901 psi · 200 bar	—
Three-point lift at ends declared	8,699 lb · 3,946 kg	9,601 lb · 4,355 kg	+10% 6000-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	7,760 lb · 3,520 kg	9,193 lb · 4,170 kg	+18% 6000-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	93.2 in · 2,368 mm	99.6 in · 2,530 mm	+7% 6000-4
Length declared	172.8 in · 4,390 mm	175.2 in · 4,450 mm	—
Width declared	77.2 in · 1,960 mm	85.2 in · 2,165 mm	+10% 6000-4
Height declared	105.1 in · 2,670 mm	105.9 in · 2,690 mm	—
Ground clearance declared	18.3 in · 465 mm	16.9 in · 430 mm	+8% 505/505-4
Turning radius, braked declared	—	15.3 ft · 4.65 m	—
Fuel tank declared	190.2 qt · 180.0 L	167.0 qt · 158.0 L	+14% 505/505-4

Source

Source