SOMECA DA-50 vs Steyr 288
13 material differences
Which should you choose?
Read our verdict on the DA-50 and the 288 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | DA-50 | 288 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 40.5 hp | 44.4 hp | +10% 288 |
| Engine declared | O.M.-MILANO COD-40 | Steyr WD-406 | differs |
| Displacement declared | 3.77 L | 2.66 L | +42% DA-50 |
| Maximum torque declared | 137 lb·ft · 186 N·m | 116 lb·ft · 157 N·m | +18% DA-50 |
| Transmission | |||
| Top speed declared | 13.7 mph · 22 km/h | 18.6 mph · 30 km/h | +36% 288 |
| Clutch declared | — | Pedal-operated dry Fichtel & Sachs single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 2.4 gpm · 9.2 L/min | 8.5 gpm · 32.0 L/min | +248% 288 |
| Pressure declared | — | 2,134 psi · 147 bar | — |
| Three-point lift at ends declared | 1,764 lb · 800 kg | 3,527 lb · 1,600 kg | +100% 288 |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,586 lb · 2,080 kg | 4,255 lb · 1,930 kg | +8% DA-50 |
| Wheelbase declared | 75.0 in · 1,905 mm | 79.3 in · 2,015 mm | +6% 288 |
| Length declared | 116.5 in · 2,960 mm | 135.2 in · 3,435 mm | +16% 288 |
| Width declared | 70.1 in · 1,780 mm | 66.5 in · 1,690 mm | +5% DA-50 |
| Height declared | 73.2 in · 1,860 mm | 56.9 in · 1,444 mm | +29% DA-50 |
| Ground clearance declared | 15.7 in · 400 mm | 16.1 in · 410 mm | — |
| Fuel tank declared | 59.2 qt · 56.0 L | 77.1 qt · 73.0 L | +30% 288 |
SOMECA DA-50 sources
Source
- Source: Traktorenlexikon, “Someca DA 50”
Steyr 288 sources
Source
- Source: Traktorenlexikon, “Steyr 288”