6 material differences · fewer than 12
Tractor oneSOMECA 715/5 L (DT)1967–1968No measured PTO figureTractor twoSOMECA SOM-6121964–1965No measured PTO figure
Which should you choose?
Read our verdict on the 715/5 L (DT) and the SOM-612 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 9 fields identical or within 5%, which is not counted as material
| Field | 715/5 L (DT) | SOM-612 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 62.1 hp | 61.2 hp | — |
| Engine declared | O.M.-FIAT CO 3 D/130-70-2 | O.M.-FIAT CO 2D/60-1 DAL | differs |
| Displacement declared | — | 4.40 L | — |
| Maximum torque declared | 203 lb·ft · 275 N·m | 200 lb·ft · 271 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.9 mph · 24 km/h | — |
| Clutch declared | Pedal-operated dry two-stage FERODO double clutch | Pedal operated two stage dry FERODO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.2 gpm · 27.3 L/min | 6.0 gpm · 22.7 L/min | +20% 715/5 L (DT) |
| Pressure declared | — | 2,988 psi · 206 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,393 lb · 2,900 kg | 6,658 lb · 3,020 kg | — |
| Wheelbase declared | 86.6 in · 2,200 mm | 86.6 in · 2,200 mm | — |
| Length declared | 149.6 in · 3,800 mm | 149.6 in · 3,800 mm | — |
| Width declared | 70.9–94.5 in · 1,800–2,400 mm | 76.6–94.5 in · 1,945–2,400 mm | differs |
| Height, over the exhaust declared | 90.0 in · 2,285 mm | 87.2 in · 2,215 mm | — |
| Ground clearance declared | 18.3 in · 465 mm | 17.5 in · 445 mm | — |
| Turning radius, braked declared | 12.5 ft · 3.82 m | 12.0 ft · 3.65 m | — |
| Fuel tank declared | 88.8 qt · 84.0 L | 95.1 qt · 90.0 L | +7% SOM-612 |
SOMECA 715/5 L (DT) sources
Source
- Source: Traktorenlexikon, “Someca 715/5 L”
SOMECA SOM-612 sources
Source
- Source: Traktorenlexikon, “Someca SOM 612”