SOMECA 715/5 L (DT) or SOMECA SOM-612?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 715/5 L (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SOM-612 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The SOMECA 715/5 L (DT) suits loader and hydraulic implement work better on this data: 20% (4.6 L/min / 1.2 gpm) more hydraulic flow.
  • The SOMECA 715/5 L (DT) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for SOMECA 715/5 L (DT) and SOMECA SOM-612, with the call on each
Question715/5 L (DT)SOM-612Call
Which puts more power through the PTO shaft?46.3 kW (62.1 hp)Traktorenlexikon, “Someca 715/5 L”45.6 kW (61.2 hp)Traktorenlexikon, “Someca SOM 612”Not comparableNot comparable on power at the PTO shaft: the 715/5 L (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SOM-612 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 715/5 L (DT) and the SOM-612.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 715/5 L (DT) and the SOM-612.
Which pumps more oil for implements?27.3 L/min (7.2 gpm)Traktorenlexikon, “Someca 715/5 L”22.7 L/min (6.0 gpm)Traktorenlexikon, “Someca SOM 612”AheadThe SOMECA 715/5 L (DT) has 20% more hydraulic flow (4.6 L/min / 1.2 gpm) than the SOMECA SOM-612 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,250 kg (4,960 lb)Traktorenlexikon, “Someca 715/5 L”—No figureNo call on three-point lift: no figure on record for the SOM-612.
Which is heavier, for traction?2,900 kg (6,393 lb)Traktorenlexikon, “Someca 715/5 L”3,020 kg (6,658 lb)Traktorenlexikon, “Someca SOM 612”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the 715/5 L (DT) and the SOM-612.
Which has the wider choice of gears?7 to 14Traktorenlexikon, “Someca 715/5 L”7Traktorenlexikon, “Someca SOM 612”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 715/5 L (DT) and the SOM-612.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Someca 715/5 L”24 km/h (14.9 mph)Traktorenlexikon, “Someca SOM 612”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Someca 715/5 L”540 rpmTraktorenlexikon, “Someca SOM 612”AheadThe SOMECA 715/5 L (DT) offers 1000 rpm at the PTO, which the SOMECA SOM-612 does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the 715/5 L (DT) and the SOM-612.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Someca 715/5 L”2WDTraktorenlexikon, “Someca SOM 612”AheadThe SOMECA 715/5 L (DT) is available with four-wheel drive; the SOMECA SOM-612 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1967–19681964–1965EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SOMECA 715/5 L (DT) has 20% more hydraulic flow (4.6 L/min / 1.2 gpm) than the SOMECA SOM-612 (both pump flow, as stated by the source).
  • The SOMECA 715/5 L (DT) offers 1000 rpm at the PTO, which the SOMECA SOM-612 does not (as stated by the sources).
  • The SOMECA 715/5 L (DT) is available with four-wheel drive; the SOMECA SOM-612 is two-wheel drive (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the 715/5 L (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the SOM-612 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources