12 material differences
Tractor oneSOMECA 300 (TD)1972–1978No measured PTO figureTractor twoURSUS C-3281963–1968No measured PTO figure
Which should you choose?
Read our verdict on the 300 (TD) and the C-328 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 300 (TD) | C-328 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 27.6 hp | 27.6 hp | — |
| Engine declared | FIAT-IVECO 8025.01.200 or 300 | URSUS S-312 B | differs |
| Displacement declared | 1.73 L | 1.96 L | +14% C-328 |
| Maximum torque declared | 63 lb·ft · 85 N·m | 74 lb·ft · 100 N·m | +18% C-328 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 14.3 mph · 23 km/h | +9% 300 (TD) |
| Clutch declared | Pedal-operated dry FIAT single-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 2.5 gpm · 9.3 L/min | 4.8 gpm · 18.0 L/min | +94% C-328 |
| Three-point lift, at the coupling points declared | 1,433 lb · 650 kg | 1,543 lb · 700 kg | +8% C-328 |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 2,381 lb · 1,080 kg | 3,646 lb · 1,654 kg | +53% C-328 |
| Wheelbase declared | 66.9 in · 1,700 mm | 72.8 in · 1,850 mm | +9% C-328 |
| Length declared | 115.4 in · 2,930 mm | 119.3 in · 3,030 mm | — |
| Width declared | 57.7–78.3 in · 1,465–1,990 mm | 66.1 in · 1,680 mm | differs |
| Ground clearance declared | 18.5 in · 470 mm | 15.7 in · 400 mm | +18% 300 (TD) |
| Turning radius, braked declared | 9.5 ft · 2.90 m | 8.8 ft · 2.69 m | +8% 300 (TD) |
| Fuel tank declared | 30.6 qt · 29.0 L | 37.0 qt · 35.0 L | +21% C-328 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
SOMECA 300 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 300”
- Source: Traktorenlexikon, “Fiat 300/300 DT”
URSUS C-328 sources
Source
- Source: Traktorenlexikon, “Ursus C-328”
- Source: Wikipedia (pl): Ursus C-328 (open data)