SAME Explorer 60 II (DT) vs VALMET 365 (365-4)

15 material differences

Tractor one

1989–1998

No measured PTO figure

Tractor two

1994–1997

No measured PTO figure

Which should you choose?

Read our verdict on the Explorer 60 II (DT) and the 365 (365-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 3 fields identical or within 5%, which is not counted as material

SAME Explorer 60 II (DT) and VALMET 365 (365-4), field by field
Field	Explorer 60 II (DT)	365 (365-4)	Gap
Engine
Engine power, claimed claimed	59.1 hp	60.2 hp	—
Engine declared	SAME 1000.3 A	VALMET 320 D	differs
Displacement declared	3.00 L	3.30 L	+10% 365 (365-4)
Maximum torque declared	151 lb·ft · 205 N·m	162 lb·ft · 220 N·m	+7% 365 (365-4)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Pedal-operated dry SAME single disc clutch	Dry FICHTEL & SACHS double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Hydraulic control declared	Load sensing	—	—
Pump flow declared	7.5 gpm · 28.5 L/min	14.5 gpm · 55.0 L/min	+93% 365 (365-4)
Pressure declared	1,740 psi · 120 bar	2,901 psi · 200 bar	+67% 365 (365-4)
Three-point lift at ends declared	5,027 lb · 2,280 kg	5,688 lb · 2,580 kg	+13% 365 (365-4)
Rear PTO speeds declared	540/540E/1000E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,600 lb · 2,540 kg	6,217 lb · 2,820 kg	+11% 365 (365-4)
Wheelbase declared	86.4 in · 2,195 mm	83.1 in · 2,112 mm	—
Length declared	135.4 in · 3,440 mm	146.1 in · 3,710 mm	+8% 365 (365-4)
Width declared	70.1 in · 1,780 mm	79.9 in · 2,030 mm	+14% 365 (365-4)
Height declared	92.5 in · 2,350 mm	103.5 in · 2,630 mm	+12% 365 (365-4)
Ground clearance declared	17.1 in · 435 mm	15.9 in · 405 mm	+7% Explorer 60 II (DT)
Turning radius, braked declared	9.1 ft · 2.78 m	11.5 ft · 3.50 m	+26% 365 (365-4)
Fuel tank declared	70.8 qt · 67.0 L	77.1 qt · 73.0 L	+9% 365 (365-4)

Source

Source