13 material differences
Tractor oneRenault 50-12 LB1987–1993No measured PTO figureTractor twoSOMECA 440 (TD)1982No measured PTO figure
Which should you choose?
Read our verdict on the 50-12 LB and the 440 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
13 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 50-12 LB | 440 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.4 hp | 44.4 hp | — |
| Engine declared | KLÖCKNER-HUMBOLD-DEUTZ F3L 912 | FIAT-IVECO 8035.02 | differs |
| Displacement declared | 2.83 L | 2.59 L | +9% 50-12 LB |
| Maximum torque declared | 107 lb·ft · 145 N·m | 114 lb·ft · 154 N·m | +6% 440 (TD) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% 50-12 LB |
| Clutch declared | Dry OMG double clutch | Dry FEREDO double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 11.1 gpm · 42.1 L/min | 7.1 gpm · 26.8 L/min | +57% 50-12 LB |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Three-point lift, at the coupling points declared | 4,718 lb · 2,140 kg | 3,858 lb · 1,750 kg | +22% 50-12 LB |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,420 lb · 2,005 kg | 4,189 lb · 1,900 kg | +6% 50-12 LB |
| Maximum permissible mass declared | 9,392 lb · 4,260 kg | — | — |
| Wheelbase declared | 78.0 in · 1,980 mm | 76.8 in · 1,950 mm | — |
| Length declared | 139.0 in · 3,530 mm | 126.8 in · 3,220 mm | +10% 50-12 LB |
| Width declared | 64.8–88.4 in · 1,645–2,245 mm | 65.0 in · 1,650 mm | differs |
| Ground clearance declared | 15.0 in · 380 mm | 13.8 in · 350 mm | +9% 50-12 LB |
| Turning radius, braked declared | 11.0 ft · 3.35 m | 9.7 ft · 2.95 m | +14% 50-12 LB |
| Fuel tank declared | 65.5 qt · 62.0 L | 57.1 qt · 54.0 L | +15% 50-12 LB |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 50-12 LB sources
Source
- Source: Traktorenlexikon, “Renault 50-12 LB R3201”
SOMECA 440 (TD) sources
Source
- Source: Traktorenlexikon, “Someca 440”