Renault 50-12 LB or SOMECA 440 (TD)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault 50-12 LB suits loader and hydraulic implement work better on this data: 57% (15.3 L/min / 4.0 gpm) more hydraulic flow and 22% (390 kg / 860 lb) more three-point lift.
  • The SOMECA 440 (TD) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
  • The Renault 50-12 LB suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Renault 50-12 LB and SOMECA 440 (TD), with the call on each
Question50-12 LB440 (TD)Call
Which puts more power through the PTO shaft?33.1 kW (44.4 hp)Traktorenlexikon, “Renault 50-12 LB R3201”33.1 kW (44.4 hp)Traktorenlexikon, “Someca 440”Not comparableNot comparable on power at the PTO shaft: the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the 50-12 LB and the 440 (TD).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the 50-12 LB and the 440 (TD).
Which pumps more oil for implements?42.1 L/min (11.1 gpm)Traktorenlexikon, “Renault 50-12 LB R3201”26.8 L/min (7.1 gpm)Traktorenlexikon, “Someca 440”AheadThe Renault 50-12 LB has 57% more hydraulic flow (15.3 L/min / 4.0 gpm) than the SOMECA 440 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,140 kg (4,718 lb)Traktorenlexikon, “Renault 50-12 LB R3201”1,750 kg (3,858 lb)Traktorenlexikon, “Someca 440”AheadThe Renault 50-12 LB has 22% more lift (390 kg / 860 lb) than the SOMECA 440 (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,005 kg (4,420 lb)Traktorenlexikon, “Renault 50-12 LB R3201”1,900 kg (4,189 lb)Traktorenlexikon, “Someca 440”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?4,260 kg (9,392 lb)Traktorenlexikon, “Renault 50-12 LB R3201”—No figureNo call on maximum permissible mass: no figure on record for the 440 (TD).
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Renault 50-12 LB R3201”8 to 12Traktorenlexikon, “Someca 440”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the 50-12 LB and the 440 (TD).
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Renault 50-12 LB R3201”25 km/h (15.5 mph)Traktorenlexikon, “Someca 440”AheadThe Renault 50-12 LB has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 440 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Renault 50-12 LB R3201”540 rpmTraktorenlexikon, “Someca 440”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Renault 50-12 LB R3201”—No figureNo call on PTO independence: not stated for the 440 (TD).
Which drives on both axles?2WDTraktorenlexikon, “Renault 50-12 LB R3201”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 440”AheadThe SOMECA 440 (TD) is available with four-wheel drive; the Renault 50-12 LB is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1987–19931982Ahead (a fact, not an advantage)The Renault 50-12 LB is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault 50-12 LB has 57% more hydraulic flow (15.3 L/min / 4.0 gpm) than the SOMECA 440 (TD) (both pump flow, as stated by the source).
  • The Renault 50-12 LB has 22% more lift (390 kg / 860 lb) than the SOMECA 440 (TD) (both lift at the hitch ends, as stated by the source).
  • The Renault 50-12 LB has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 440 (TD) (both top speed forward, as stated by the source).
  • The SOMECA 440 (TD) is available with four-wheel drive; the Renault 50-12 LB is two-wheel drive (as stated by the sources).
  • The Renault 50-12 LB is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Not comparable on power at the PTO shaft: the 50-12 LB has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 440 (TD) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources