Nuffield 10/60 vs Steyr Plus 50
12 material differences
Which should you choose?
Read our verdict on the 10/60 and the Plus 50 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 10/60 | Plus 50 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 57.5 hp | 49.3 hp | +17% 10/60 |
| Engine declared | BMC 38 T | Steyr WD-407.40 or WD-408.81 | differs |
| Displacement declared | 3.77 L | — | — |
| Maximum torque declared | 170 lb·ft · 230 N·m | 145 lb·ft · 196 N·m | +17% 10/60 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 16.8 mph · 27 km/h | +8% Plus 50 |
| Clutch declared | Pedal-operated dry Borg & Beck single-plate clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 8.7 gpm · 32.8 L/min | +7% 10/60 |
| Three-point lift at ends declared | — | 4,299 lb · 1,950 kg | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,864 lb · 2,660 kg | 4,773 lb · 2,165 kg | +23% 10/60 |
| Maximum permissible mass declared | — | 8,818 lb · 4,000 kg | — |
| Wheelbase declared | 78.0 in · 1,981 mm | 83.7 in · 2,125 mm | +7% Plus 50 |
| Length declared | 121.5 in · 3,086 mm | 138.2 in · 3,510 mm | +14% Plus 50 |
| Width declared | 69.0 in · 1,753 mm | 66.1 in · 1,678 mm | — |
| Height declared | 80.7 in · 2,051 mm | 60.4 in · 1,534 mm | +34% 10/60 |
| Ground clearance declared | 12.6 in · 320 mm | 15.7 in · 400 mm | +25% Plus 50 |
| Turning radius, braked declared | 10.4 ft · 3.18 m | 11.3 ft · 3.43 m | +8% Plus 50 |
| Fuel tank declared | 67.2 qt · 63.6 L | 87.7 qt · 83.0 L | +31% Plus 50 |
Nuffield 10/60 sources
Source
- Source: Traktorenlexikon, “Nuffield 10/60 (1964-1967)”
Steyr Plus 50 sources
Source
- Source: Traktorenlexikon, “Steyr Plus 50”