12 material differences
Tractor oneMASSEY-HARRIS 7441948–1953No measured PTO figureTractor twoVALMET 361 D1960–1965No measured PTO figure
Which should you choose?
Read our verdict on the 744 and the 361 D → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | 744 | 361 D | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 41.4 hp | 41.4 hp | — |
| Engine declared | PERKINS P-6 | VALMET 310 D or 310 A | differs |
| Displacement declared | 4.73 L | 2.69 L | +76% 744 |
| Maximum torque declared | — | 116 lb·ft · 157 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 18.6 mph · 30 km/h | +50% 361 D |
| Clutch declared | Pedal-operated dry single-plate clutch | Pedal operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | — | 5.8 gpm · 22.0 L/min | — |
| Rear PTO speeds declared | 534 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,115 lb · 2,320 kg | 3,902 lb · 1,770 kg | +31% 744 |
| Wheelbase declared | 86.2 in · 2,190 mm | 74.6 in · 1,895 mm | +16% 744 |
| Length declared | 129.9 in · 3,300 mm | 114.6 in · 2,910 mm | +13% 744 |
| Width declared | 70.1 in · 1,780 mm | 67.9–88.2 in · 1,725–2,240 mm | differs |
| Ground clearance declared | 9.7 in · 247 mm | 17.7 in · 450 mm | +82% 361 D |
| Turning radius, braked declared | 10.6 ft · 3.22 m | 10.0 ft · 3.04 m | +6% 744 |
| Fuel tank declared | 76.8 qt · 72.7 L | 40.2 qt · 38.0 L | +91% 744 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
MASSEY-HARRIS 744 sources
Source
- Source: Traktorenlexikon, “Massey-Harris Massey-Harris 744”
VALMET 361 D sources
Source
- Source: Traktorenlexikon, “Valmet 361 D”