Massey Ferguson MF 377 (A) vs VALMET 355 (355/4)

12 material differences

Tractor one

1987–1994

No measured PTO figure

Tractor two

1990–1994

No measured PTO figure

Which should you choose?

Read our verdict on the MF 377 (A) and the 355 (355/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 377 (A) and VALMET 355 (355/4), field by field
Field	MF 377 (A)	355 (355/4)	Gap
Engine
Engine power, claimed claimed	61.2 hp	60.2 hp	—
Engine declared	Perkins A 4.236	VALMET TD-33 D 3 or 320 D	differs
Displacement declared	3.87 L	3.30 L	+17% MF 377 (A)
Maximum torque declared	179 lb·ft · 243 N·m	146 lb·ft · 198 N·m	+23% MF 377 (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	15.5 mph · 25 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	8.2 gpm · 31.0 L/min	—
Pressure declared	2,756 psi · 190 bar	4,206 psi · 290 bar	+53% 355 (355/4)
Three-point lift at ends declared	5,291 lb · 2,400 kg	5,688 lb · 2,580 kg	+8% 355 (355/4)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	6,923 lb · 3,140 kg	5,886 lb · 2,670 kg	+18% MF 377 (A)
Wheelbase declared	94.8 in · 2,409 mm	83.1 in · 2,112 mm	+14% MF 377 (A)
Length declared	155.9 in · 3,960 mm	146.1 in · 3,710 mm	+7% MF 377 (A)
Width declared	81.1 in · 2,060 mm	77.4 in · 1,965 mm	—
Height declared	103.9 in · 2,640 mm	96.9 in · 2,460 mm	+7% MF 377 (A)
Ground clearance declared	—	15.9 in · 405 mm	—
Turning radius, braked declared	—	10.2 ft · 3.10 m	—
Fuel tank declared	107.8 qt · 102.0 L	77.1 qt · 73.0 L	+40% MF 377 (A)

Source

Source