Massey Ferguson MF 377 (A) or VALMET 355 (355/4)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 377 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 355 (355/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson MF 377 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 377 (A) | 355 (355/4) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 45.6 kW (61.2 hp)Traktorenlexikon, “Massey Ferguson MF 377” | 44.9 kW (60.2 hp)Traktorenlexikon, “Valmet 355” | Not comparableNot comparable on power at the PTO shaft: the MF 377 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 355 (355/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 377 (A) and the 355 (355/4). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 377 (A) and the 355 (355/4). |
| Which pumps more oil for implements? | — | 31.0 L/min (8.2 gpm)Traktorenlexikon, “Valmet 355” | No figureNo call on hydraulic flow: no figure on record for the MF 377 (A). |
| Which lifts more on the three-point hitch? | 2,400 kg (5,291 lb)Traktorenlexikon, “Massey Ferguson MF 377” | 2,580 kg (5,688 lb)Traktorenlexikon, “Valmet 355” | EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which is heavier, for traction? | 3,140 kg (6,923 lb)Traktorenlexikon, “Massey Ferguson MF 377” | 2,670 kg (5,886 lb)Traktorenlexikon, “Valmet 355” | Ahead (a fact, not an advantage)The Massey Ferguson MF 377 (A) is 18% heavier (470 kg / 1,036 lb) than the VALMET 355 (355/4) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the MF 377 (A) and the 355 (355/4). |
| Which has the wider choice of gears? | 24Traktorenlexikon, “Massey Ferguson MF 377” | 8 to 12Traktorenlexikon, “Valmet 355” | AheadThe Massey Ferguson MF 377 (A) has 100% more forward gears (12 gears) than the VALMET 355 (355/4) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 377 (A) and the 355 (355/4). |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 377” | 25 km/h (15.5 mph)Traktorenlexikon, “Valmet 355” | AheadThe Massey Ferguson MF 377 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the VALMET 355 (355/4) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 377” | 540 rpmTraktorenlexikon, “Valmet 355” | AheadThe Massey Ferguson MF 377 (A) offers 1000 rpm at the PTO, which the VALMET 355 (355/4) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 377” | independentTraktorenlexikon, “Valmet 355” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 377” | 2WD / 4WDTraktorenlexikon, “Valmet 355” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1987–1994 | 1990–1994 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 377 (A) is 18% heavier (470 kg / 1,036 lb) than the VALMET 355 (355/4) (both unladen weight, as stated by the source).
- The Massey Ferguson MF 377 (A) has 100% more forward gears (12 gears) than the VALMET 355 (355/4) (both forward gears, as stated by the source).
- The Massey Ferguson MF 377 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the VALMET 355 (355/4) (both top speed forward, as stated by the source).
- The Massey Ferguson MF 377 (A) offers 1000 rpm at the PTO, which the VALMET 355 (355/4) does not (as stated by the sources).
- Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 377 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 355 (355/4) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources