13 material differences

Tractor oneMassey Ferguson MF 340 (A)1988–1994No measured PTO figureTractor twoSAME 45 DT1992–2003No measured PTO figure

Which should you choose?

Read our verdict on the MF 340 (A) and the 45 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

13 material differences · 2 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 340 (A) and SAME 45 DT, field by field
FieldMF 340 (A)45 DTGap
Engine
Engine power, claimed claimed41.4 hp41.4 hp—
Engine declaredPerkins AD 3.152MITSUBISHI K 4 F-DTdiffers
Displacement declared2.50 L1.49 L+68% MF 340 (A)
Maximum torque declared124 lb·ft · 168 N·m74 lb·ft · 100.2 N·m+68% MF 340 (A)
Transmission
Top speed declared18.6 mph · 30 km/h15.5 mph · 25 km/h+20% MF 340 (A)
Clutch declaredPedal operated, dry and air-cooled double clutchPedal operated dry single plate clutchdiffers
Hydraulics & hitch
Hydraulic control declared—Load sensing—
Pump flow declared5.2 gpm · 19.5 L/min7.9 gpm · 30.0 L/min+54% 45 DT
Pressure declared—2,901 psi · 200 bar—
Three-point lift, at the coupling points declared4,729 lb · 2,145 kg2,646 lb · 1,200 kg+79% MF 340 (A)
Rear PTO speeds declared540/540E rpm540/1000 rpmdiffers
Weight & dimensions
Unladen weight declared5,203 lb · 2,360 kg2,227 lb · 1,010 kg+134% MF 340 (A)
Maximum permissible mass declared—5,291 lb · 2,400 kg—
Wheelbase declared81.9 in · 2,080 mm66.9 in · 1,700 mm+22% MF 340 (A)
Length declared137.2 in · 3,485 mm119.3 in · 3,030 mm+15% MF 340 (A)
Width declared70.7 in · 1,795 mm49.4–65.2 in · 1,255–1,655 mmdiffers
Ground clearance declared—15.0 in · 380 mm—
Turning radius, braked declared10.5 ft · 3.21 m10.8 ft · 3.30 m—
Fuel tank declared71.9 qt · 68.0 L30.6 qt · 29.0 L+134% MF 340 (A)

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Massey Ferguson MF 340 (A) sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 340”
  • Source: Traktorenlexikon, “Massey Ferguson MF 148”

SAME 45 DT sources

Source
  • Source: Traktorenlexikon, “SAME Solaris 45”
  • Source: Traktorenlexikon, “Lamborghini Runner 450 DT A”