Massey Ferguson MF 340 (A) or SAME 45 DT?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 340 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 340 (A) and SAME 45 DT, with the call on each
QuestionMF 340 (A)45 DTCall
Which puts more power through the PTO shaft?30.9 kW (41.4 hp)Traktorenlexikon, “Massey Ferguson MF 340”30.9 kW (41.4 hp)Traktorenlexikon, “SAME Solaris 45”Not comparableNot comparable on power at the PTO shaft: the MF 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 340 (A) and the 45 DT.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 340 (A) and the 45 DT.
Which pumps more oil for implements?19.5 L/min (5.2 gpm)Traktorenlexikon, “Massey Ferguson MF 340”30.0 L/min (7.9 gpm)Traktorenlexikon, “SAME Solaris 45”AheadThe SAME 45 DT has 54% more hydraulic flow (10.5 L/min / 2.8 gpm) than the Massey Ferguson 340 (A) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,145 kg (4,729 lb)Traktorenlexikon, “Massey Ferguson MF 340”1,200 kg (2,646 lb)Traktorenlexikon, “SAME Solaris 45”AheadThe Massey Ferguson 340 (A) has 79% more lift (945 kg / 2,083 lb) than the SAME 45 DT (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,360 kg (5,203 lb)Traktorenlexikon, “Massey Ferguson MF 340”1,010 kg (2,227 lb)Traktorenlexikon, “SAME Solaris 45”Ahead (a fact, not an advantage)The Massey Ferguson 340 (A) is 134% heavier (1,350 kg / 2,976 lb) than the SAME 45 DT (both unladen weight, as stated by the source).
Which may carry more ballast and load?—2,400 kg (5,291 lb)Traktorenlexikon, “SAME Solaris 45”No figureNo call on maximum permissible mass: no figure on record for the MF 340 (A).
Which has the wider choice of gears?8Traktorenlexikon, “Massey Ferguson MF 340”12Traktorenlexikon, “SAME Solaris 45”AheadThe SAME 45 DT has 50% more forward gears (4 gears) than the Massey Ferguson 340 (A) (both forward gears, as stated by the source).
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the MF 340 (A) and the 45 DT.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 340”25 km/h (15.5 mph)Traktorenlexikon, “SAME Solaris 45”AheadThe Massey Ferguson 340 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME 45 DT (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/540E rpmTraktorenlexikon, “Massey Ferguson MF 340”540/1000 rpmTraktorenlexikon, “SAME Solaris 45”AheadThe SAME 45 DT offers 1000 rpm at the PTO, which the Massey Ferguson 340 (A) does not (as stated by the sources).
Which PTO runs independently of the ground drive?——No figureNo call on PTO independence: not stated for the MF 340 (A) and the 45 DT.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 340”4WDTraktorenlexikon, “SAME Solaris 45”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1988–19941992–2003EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The SAME 45 DT has 54% more hydraulic flow (10.5 L/min / 2.8 gpm) than the Massey Ferguson 340 (A) (both pump flow, as stated by the source).
  • The Massey Ferguson 340 (A) has 79% more lift (945 kg / 2,083 lb) than the SAME 45 DT (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson 340 (A) is 134% heavier (1,350 kg / 2,976 lb) than the SAME 45 DT (both unladen weight, as stated by the source).
  • The SAME 45 DT has 50% more forward gears (4 gears) than the Massey Ferguson 340 (A) (both forward gears, as stated by the source).
  • The Massey Ferguson 340 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the SAME 45 DT (both top speed forward, as stated by the source).
  • The SAME 45 DT offers 1000 rpm at the PTO, which the Massey Ferguson 340 (A) does not (as stated by the sources).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 340 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 45 DT has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources