Massey Ferguson MF 3075 (A) vs SAME Silver 100.6 DT

8 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1995–2004

No measured PTO figure

Which should you choose?

Read our verdict on the MF 3075 (A) and the Silver 100.6 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 7 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 3075 (A) and SAME Silver 100.6 DT, field by field
Field	MF 3075 (A)	Silver 100.6 DT	Gap
Engine
Engine power, claimed claimed	93.7 hp	98.6 hp	—
Engine declared	Perkins 1004-4 THR2	SAME-DEUTZ-FAHR 1000.6 A 1	differs
Displacement declared	3.99 L	6.00 L	+50% Silver 100.6 DT
Maximum torque declared	261 lb·ft · 354 N·m	249 lb·ft · 337 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated, dry and air-cooled VALEO single-plate clutch	—	—
Hydraulics & hitch
Pump flow declared	13.2 gpm · 49.9 L/min	15.1 gpm · 57.0 L/min	+14% Silver 100.6 DT
Pressure declared	2,277–2,350 psi · 157–162 bar	2,176 psi · 150 bar	differs
Three-point lift at ends declared	11,023 lb · 5,000 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/540E/1000E/1000 rpm	differs
Weight & dimensions
Unladen weight declared	9,733 lb · 4,415 kg	9,877 lb · 4,480 kg	—
Maximum permissible mass declared	—	15,432 lb · 7,000 kg	—
Wheelbase declared	100.5 in · 2,553 mm	103.7 in · 2,635 mm	—
Length declared	179.6 in · 4,562 mm	175.4 in · 4,455 mm	—
Width declared	80.7 in · 2,049 mm	78.0 in · 1,980 mm	—
Height declared	108.2 in · 2,749 mm	107.7 in · 2,735 mm	—
Ground clearance declared	16.9 in · 430 mm	18.7 in · 475 mm	+10% Silver 100.6 DT
Turning radius, braked declared	—	12.8 ft · 3.91 m	—
Fuel tank declared	200.8 qt · 190.0 L	158.5 qt · 150.0 L	+27% MF 3075 (A)

Source

Source