Massey Ferguson MF 3075 (A) or SAME Silver 100.6 DT?
Which should you choose?
On performance, every comparable figure that differs favours the SAME Silver 100.6 DT: hydraulic flow.
- The SAME Silver 100.6 DT suits loader and hydraulic implement work better on this data: 14% (7.1 L/min / 1.9 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 3075 (A) | Silver 100.6 DT | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 64.2 kW (86.1 hp)Traktorenlexikon, “Massey Ferguson MF 3075” | 64.0 kW (85.8 hp)Traktorenlexikon, “SAME Silver 100.6” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 3075 (A) and the Silver 100.6 DT. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 3075 (A) and the Silver 100.6 DT. |
| Which pumps more oil for implements? | 49.9 L/min (13.2 gpm)Traktorenlexikon, “Massey Ferguson MF 3075” | 57.0 L/min (15.1 gpm)Traktorenlexikon, “SAME Silver 100.6” | AheadThe SAME Silver 100.6 DT has 14% more hydraulic flow (7.1 L/min / 1.9 gpm) than the Massey Ferguson MF 3075 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,000 kg (11,023 lb)Traktorenlexikon, “Massey Ferguson MF 3075” | — | No figureNo call on three-point lift: no figure on record for the Silver 100.6 DT. |
| Which is heavier, for traction? | 4,415 kg (9,733 lb)Traktorenlexikon, “Massey Ferguson MF 3075” | 4,480 kg (9,877 lb)Traktorenlexikon, “SAME Silver 100.6” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | 7,000 kg (15,432 lb)Traktorenlexikon, “SAME Silver 100.6” | No figureNo call on maximum permissible mass: no figure on record for the MF 3075 (A). |
| Which has the wider choice of gears? | 32Traktorenlexikon, “Massey Ferguson MF 3075” | 15 to 60Traktorenlexikon, “SAME Silver 100.6” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 3075 (A) and the Silver 100.6 DT. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3075” | 40 km/h (24.9 mph)Traktorenlexikon, “SAME Silver 100.6” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3075” | 540/540E/1000E/1000 rpmTraktorenlexikon, “SAME Silver 100.6” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 3075” | independentTraktorenlexikon, “SAME Silver 100.6” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3075” | 4WDTraktorenlexikon, “SAME Silver 100.6” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–1995 | 1995–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The SAME Silver 100.6 DT has 14% more hydraulic flow (7.1 L/min / 1.9 gpm) than the Massey Ferguson MF 3075 (A) (both pump flow, as stated by the source).
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources