11 material differences · fewer than 12
Tractor oneMassey Ferguson MF 1134 (A)1978–1990No measured PTO figureTractor twoVALMET 15021975–1980No measured PTO figure
Which should you choose?
Read our verdict on the MF 1134 (A) and the 1502 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | MF 1134 (A) | 1502 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 134 hp | — |
| Engine declared | Perkins AT 6.354.4 | VALMET 611 CS | differs |
| Displacement declared | 5.80 L | 6.60 L | +14% 1502 |
| Maximum torque declared | 344 lb·ft · 466 N·m | 406 lb·ft · 550 N·m | +18% 1502 |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 1502 |
| Clutch declared | Pedal-operated dry Luk double clutch with 330 mm diameter | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.5 L/min | — | — |
| Pressure declared | 2,368 psi · 163.3 bar | — | — |
| Three-point lift, at the coupling points declared | 11,905 lb · 5,400 kg | 7,871 lb · 3,570 kg | +51% MF 1134 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,133 lb · 5,050 kg | 16,469 lb · 7,470 kg | +48% 1502 |
| Wheelbase declared | 111.8 in · 2,840 mm | 101.3 in · 2,572 mm | +10% MF 1134 (A) |
| Length declared | 185.0 in · 4,700 mm | 209.8 in · 5,330 mm | +13% 1502 |
| Width declared | 98.4 in · 2,500 mm | 83.7 in · 2,125 mm | +18% MF 1134 (A) |
| Ground clearance declared | — | 16.5 in · 420 mm | — |
| Fuel tank declared | 206.1 qt · 195.0 L | 190.2 qt · 180.0 L | +8% MF 1134 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1134 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”
VALMET 1502 sources
- Source: Traktorenlexikon, “Valmet 1502”