7 material differences · fewer than 12
Tractor oneLeyland 2451973–1975No measured PTO figureTractor twoUZINA TRACTORUL 420 (DT)1974–1981No measured PTO figure
Which should you choose?
Read our verdict on the 245 and the 420 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 245 | 420 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 46.8 hp | 41.3 hp | +13% 245 |
| Engine declared | Perkins D 3152 | UTB D-115 | differs |
| Displacement declared | 2.50 L | 2.34 L | +7% 245 |
| Maximum torque declared | 128 lb·ft · 173 N·m | 108 lb·ft · 147 N·m | +18% 245 |
| Transmission | |||
| Top speed declared | 16.2 mph · 26 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry Borg & Beck double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.0 gpm · 30.2 L/min | 4.2 gpm · 16.0 L/min | +89% 245 |
| Pressure declared | — | 2,973 psi · 205 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,236 lb · 2,375 kg | 3,616 lb · 1,640 kg | +45% 245 |
| Wheelbase declared | 74.4 in · 1,890 mm | 74.8 in · 1,900 mm | — |
| Length declared | 126.0 in · 3,200 mm | 122.4 in · 3,110 mm | — |
| Width declared | 63.8 in · 1,621 mm | 68.1 in · 1,730 mm | +7% 420 (DT) |
| Ground clearance declared | 15.7 in · 399 mm | 20.9 in · 530 mm | +33% 420 (DT) |
| Turning radius, braked declared | 10.1 ft · 3.07 m | 10.6 ft · 3.22 m | — |
| Fuel tank declared | — | 57.1 qt · 54.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Leyland 245 sources
- Source: Traktorenlexikon, “Leyland 245”
- Source: Traktorenlexikon, “Lindner BF 420 SN/SA”
UZINA TRACTORUL 420 (DT) sources
- Source: Traktorenlexikon, “UTB 420 (DT)”
- Source: Traktorenlexikon, “UTB U 445”